How to import Ls-Dyna results to Abaqus visualization?

26 October 2023 0 6K Report

A model has been analyzed in Ls-Dyna software. How can the results be imported into Abaqus for further analysis?

Badges
Science topic

More Salar Rasti's questions See All

Is there a good document to teach column-and-constraint generation algorithm (CCG) to solve tri-level problems?

Hello friends, I have a tri-level problem (Defender- attacker-defender) that I wanted to solve with the column-and-constraint generation algorithm (CCG). Is there a good document to teach this...

03 June 2023 2,823 1 View

How can define imperfection's equation in Abaqus?

There are several methods to consider the imperfection of the structure like the eigenvalue buckling mode, nonlinear buckling mode and weld depressions. But how to define imperfection as an...

02 June 2023 175 5 View

Mininet Delay Type!?

What is the type of delay in Mininet (shown in attached figure)? Is it propagation delay or packet transmission delay or what? What is the minimum allowed delay value that can be set in this field?

30 April 2023 6,681 0 View

Is the Open vSwitch (OVS) calculate the FCS?

Frame check sequence (FCS) is an error-detecting code added to a frame in a communication protocol used in the data-link layer, and OVS is the switch used in the SDN network architecture data...

02 April 2023 7,094 1 View

What is the reason of pressure drop of C2+ stream (e.g. C2, C3, C4 etc.) in underground pipeline when upstream and downstream of pipe is isolated?

pressure and temperature of pipeline in normal condition is 32 C and 90 barg. C2+ stream is liquid when pipeline is in service.

23 August 2022 9,063 0 View

Comprehensive references about vitamin B12 levels (concentrations) in aquatic ecosystems?

Hello everyone. Does anyone have comprehensive references (review articles, books, data set/bank) on Vitamin B12 (cobalamin) levels or concentrations in aquatic ecosystems (lakes, ocean, coastal...

17 August 2022 5,512 3 View

How to solve this kind of meshing problem for a complex structure in Abaqus?

as you can see I have problems with meshing on my Voronoi structure that I produced through rhino 3d, help on this problem and how to mesh these kinds of structures

30 October 2021 3,823 2 View

Does the Mininet-WiFi emulator support multiple APs communication without a controller?

We are working on the linear topology of multiple APs, but the connection between stations in different APs cannot be verified unless we add an SDN controller to the network! Is there any method...

21 October 2021 3,410 2 View

Does OPNET support Unit Disk Graph Medium (UDGM)?

if yes how to activate this feature for network scenarios?

06 September 2021 7,013 1 View

How to make multicast IPv6 ping from serial connected local host to nodes in 6LoWPAN Network?

I am looking for doing multicast IPv6 ping to nodes connected to a border router, the border router is connected in serial to a local host (Ubuntu), so how to do multicast ping from local host to...

05 September 2021 5,385 2 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View

Why running a restart analysis in Abaqus in Ubuntu OS gives an error as attached when running the same job in Windows doesn't give any error and runs?

I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...

29 July 2024 9,572 3 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View

How to add viscosity into a hyperelastic material such as Mooney-Rivlin rubber in LS-DYNA?

Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...

24 July 2024 5,908 0 View

Abaqus cylinder buckling riks analysis?

hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...

20 July 2024 647 2 View

Best statistical test for three groups and binary dependent variable ?

Hello everyone, I am currently working on a project where I aim to analyze color preferences in data visualizations across participants from three different countries. The dependent variable in...

19 July 2024 4,178 2 View

Abaqus 2023 - How to know how many elements have been deleted during a simulation ?

Hi all, I am using the element deletion process based on a Tsai-Wu criterion through a UMAT with a specific State Value controlling the process (DepVar -> Variable number controlling element...

17 July 2024 1,501 1 View