How to extract wavelength dependent responsivity measurement of germanium photodetector in Silvaco atlas?

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View

Using SILVACO to design tandem organic solar cells?

Hi Can anyone please suggest me how can I study the parameters of solar cells made of graphene oxide and any other organic material composite using SILVACO. I would also like to know how I can add...

15 February 2021 5,795 3 View

What is the best method to add nanoparticles in organic solar cell simulation using silvaco software ??

i built the structure of the organic solar cell (ito-P3HT_PCPM-PEDOT_PSS-al) then i used BEAM statement to add sunlight so what is the best method to add nanoparticles in layers

03 January 2021 7,107 11 View

Which is the best software in Organic and Perovskite solar cells simulation SILVACO or Fluxim (SETFOS)?

I need to use a new software in Organic and Perovskite solar cell simulation

24 December 2020 2,397 4 View

How to simulate Hetrojunction(SiGe Channel) finfet using matlab is it possible?

17 November 2020 193 3 View

In a photodetector, can the photocurrent be independent of the device's active length?

Hello everyone, I have a device (metal-oxide photodetector) with photosensitivity of around 10, in which regardless of the distance between electrodes, the value of photocurrent remains constant,...

08 November 2020 9,931 6 View

What is vapor pressure of Ge for eBeam deposition?

Hello everybody, I recently asked for the vapor pressure of Si because we were trying to make a thin film by electron beam deposition in my laboratory. However, we have decided to change to...

04 November 2020 3,630 6 View

FTIR new peak assignment Ge np coated with Oleylamine?

Dear All, I've been synthesizing Ge nanoparticles using OAm as a solvent/capping agent. Now I'm in the process of assigning the FTIR peaks of my samples. I've assigned almost every peak in the...

02 November 2020 4,227 2 View

How to get ZnO material using ATLAS Silvaco?

Hi everyone, I am not familiar using ATLAS Silvaco, I would like to ask, steps to define material not in ATLAS like ZnO and there is any input file should I include?

30 October 2020 5,704 3 View

Is there any way to separete the band at H point in the following picture?

Its a band structure of germanium where I see CB and VB are connected through H to K points. I want them to be connected only in one high symmetry point. What are the parameters I need to change...

25 September 2020 9,413 3 View