There isn't a straightforward way to extract circuit parameter values directly from an IDC ZOR antenna. IDC ZOR antennas are physical structures designed to radiate or receive electromagnetic waves, and their properties are typically described in the antenna's scattering parameters (S-parameters) rather than circuit parameters.

S-parameters describe how a device performs under specific frequencies. They relate the incident wave to the reflected and transmitted waves at the antenna's ports.

If you have the S-parameter data for your IDC ZOR antenna, you might be able to use it to calculate some relevant circuit parameters using formulas, but this would likely require knowledge of antenna theory and specific design details of the IDC ZOR antenna.

Here are some resources that you might find helpful:

• Scattering parameters https://en.wikipedia.org/wiki/Scattering_parameters
• IDC ZOR antenna (information might be limited due to the potentially proprietary nature of the design)
• Antenna theory https://en.wikipedia.org/wiki/Antenna_%28radio%29

• Physical Structure: IDC ZOR antennas are physical structures designed to transmit or receive electromagnetic waves. Their properties are typically described in terms of how they interact with those waves, not electrical circuit elements.
• Scattering Parameters (S-parameters): Instead of circuit parameters, IDC ZOR antennas are characterized by S-parameters. These parameters describe how the antenna performs at specific frequencies. They relate incoming electromagnetic waves to reflected and transmitted waves at the antenna's connection points (ports).

Extracting Values (Potentially):

While direct extraction of circuit parameters isn't possible, S-parameter data might be used to calculate relevant circuit parameters under certain conditions. This would require:

• Knowledge of Antenna Theory: You'd need a good understanding of antenna theory and the specific design of the IDC ZOR antenna.
• Conversion Formulas: Depending on the desired circuit parameter and the antenna's design, there might be formulas to convert S-parameters into circuit equivalents. However, these formulas might be complex and depend on the specific antenna.

Finding Information:

• S-parameter Data: This data might be available from the antenna manufacturer's datasheet or through specific antenna measurements.
• Limited Resources: Due to the potentially proprietary nature of the IDC ZOR antenna design, information on converting S-parameters to circuit parameters might be limited.

Here are some resources that you might find helpful:

• Scattering Parameters https://en.wikipedia.org/wiki/Scattering_parameters
• IDC ZOR antenna (information might be limited due to its potentially proprietary design)