No title

02 March 2021 932 1 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

How to simulate 5G Quality of Service characteristics?

For my research, I would like to simulate an end to end 5G network. My goal is to observe the behaviour of SDAP protocol, dynamic configuration of 5QI values etc. To summarize I would like to...

21 February 2021 7,624 3 View

SSR primers are species specific or we can use it for any plant species ?

Hi, any one please guide me; SSR primers are species specific or trait specific. i have few primer which was reported in articles for wheat yield can i use these similar primer for lentil yield...

20 February 2021 315 4 View

Solution of 2D convection diffusion heat equation using MATLAB ?

This is a polymer heating problem. Polymer enters at around 180C (x=0) in the barrel. Also barrel initial temperature is 180 (t=0). Some heat Is added along whole length of barrel q. We have to...

15 February 2021 3,887 1 View

How is Initial GDP measured ?

Dear All, I am working on estimating Debt-Growth Threshold but confused about some points. My questions are; - How do we calculate initial GDP Per Capita? Shall we do it in STATA or excel file?...

15 February 2021 2,677 2 View

How to get actual or true SoC while predicting SoC for Batteries using Data Driven Approaches?

I have seen it in multiple research articles that authors use certain approaches to predict electric vehicle battery's state of charge(SoC) and then they compare it with battery's true SoC. So I...

11 February 2021 9,070 3 View

What is the magnetic anisotropy constant for Permalloy (NiFe-80-20)? Can anyone suggest some papers?

Need to know the equation of anisotropy energy for permalloy and also the constants. Any reference paper will be helpful. Thanks for your time and cooperation.

26 January 2021 7,842 3 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Concrete compressive strength databases?

I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...

27 February 2021 6,801 3 View

What are effects of steel jacketing on flexural strength?

Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...

22 February 2021 1,906 5 View

The most suitable method to calculate the stress intensity factor in the presence of contact between the crack lips?

I'm trying to study cracked structures under a compressive load taking into account contact between the crack lips. I would like to know if the method of extrapolation by displacement remains...

21 February 2021 8,694 4 View

Is there any kind of data available for connection properties like signal strength between UE and RAN?

Is there any kind of data available for connection strength between UE and RAN? I am looking for signal strength, the geographical coverage of RAN's in a given Tracking Area, Coverage Area over a...

16 February 2021 1,073 5 View

Can anyone direct me to an existing Validated Health Care Survey/Instrument?

Hello, I am working on a paper and looking for an existing Validated Health Care Survey/Instrument. I have been performing virtual ergonomic evaluations since the start of COVID and want to...

04 February 2021 4,756 2 View

Which software is the best to model a non-linear concrete (ABAQUS, ANSYS,ADINA, ATENA, etc.)?

What is the best finite element modeling software packages for modeling non-linear and fracture analysis of CONCRETE? I've had some with ABAQUS standart/explicit, but I would like to learn if...

27 January 2021 330 6 View

Do we need to keep looking for the fracture angle after the Puck's failure initiation is reached?

Greetings to everyone, Our team is currently working on the development of a VUMAT code in Abaqus for composite modelling using the Puck's failure theory as damage initiation criteria. Currently...

20 January 2021 6,367 1 View

Fracture energy of concrete at sub-zero temperatures?

Both tensile and compressive strengths of concrete increase with the decrease in temperature. With this in mind and considering that fracture energy is in direct correlation with the so-called...

18 January 2021 8,778 4 View

Permeability of fractured reservoirs?

Hi all, What I know the permeability of matrix and fracture can be in a broad range in fractured reservoirs. Am looking for the most usual range for their permeability separately. I will be highly...

15 January 2021 5,271 2 View