23 June 2021 2 7K Report

how to one determine the maximum acceptable load applied to the geosynthetic reinforcement product?

I know that we can use the isochronous curves found from the creep curves for the same material at different loads so I want to know on what basis we choose these different loads ?

More Naga Linda's questions See All
Smart spectacles for paralysis people using the eye blink sensor it will detect the blink and provide what they need?

a man was facing a paralysis problem.. he wants some drink or else food not even he ask, because he paralyzed .while he put the smart spectacles he blinks the eyes it will count the sensors and...

13 July 2024 8,021 1 View

Where do i get dataset in fuzzy set?

cCurrently, I am doing research in approximation of fuzzy set, I am looking for a real-world data set that is in fuzzy set to use.

22 May 2024 6,520 2 View

MDR1 (ABCB1) western blotting?

Has anyone seen MDR1 bands below 75 kDa? I am using a monoclonal antibody and I am expecting a band at 170 kDa

15 May 2024 8,690 4 View

Can I obtain a sample of the MAACL-R form by Marvin Zuckerman?

It is a form of 132 adjectives used to measure affect, such as Anxiety, Depression, Hostility, and Positive Affect.

22 April 2024 6,628 0 View

How can I dissolve my drug in 0.5% methylcellulose?

I am preparing a drug for oral gavage which needs to be dissolved in 0.5% methylcellulose. The drug powder remains as clump and refuses to go into solution. Any tips on this?

01 April 2024 4,859 3 View

How do I revise the title of an article I on Reserach Gate?

Hi, My recent publication "Exploring cross-boundary collaboration for youth mental health in Sweden – a qualitative study using the integrative framework for collaborative governance". Is wrongly...

27 March 2024 3,153 2 View

Has anyone ever attended this conference "The next generation of nanomedicines: Formulation to precission therapies"?

I would like to participate in this conference and would appreciate hearing from others about their experiences at previous conferences. It would also be helpful if any participants have written a...

07 February 2024 1,536 0 View

Can someone help me with XRD data for JCPDS Card No 1-077-2303?

Can someone help me with XRD data for JCPDS Card No 1-077-2303

30 January 2024 5,994 3 View

How do I convert MRTrix3 .tck files to MNI Space?

Good morning Neuroimaging Experts, I am running CSD probabilistic tractography on the S900 release of the Human Connectome Project dataset. I am trying to convert my .tck files to MNI space, and...

11 January 2024 9,388 0 View

Approximate total number of Anabaptists executed during the 16th and 17th centuries in Europe?

Submitting research paper on persecution and execution of Anabaptists during this period, and unable to locate a source for total figures.

28 November 2023 8,673 0 View

Similar questions and discussions
How to cacualte the creep life of polycrystal with CPFEM?

I saw a paper(PHAN V-T, ZHANG X, LI Y, et al. Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature [J]. Mechanics of Materials, 2017, 114:...

16 July 2024 8,436 0 View

Abaqus不收敛，警告里面出现下列问题，需要更改哪个地方？?

The system matrix has 172 negative eigenvalues. Displacement increment for contact is too big. Displacement increment for contact is too big. The strain increment has exceeded fifty times the...

05 July 2024 3,839 2 View

What is the difference between creep deformation and stress relaxation ?

I understand the basic definition for both. I found a literature to describe both of them. In the paper, they states: If a stress is applied to a concrete body, the body experiences an elastic...

19 June 2024 525 3 View

Difference between creep deformation and stress relaxation deformation ?

I understand the basic definitions of creep and pressure relaxation. However, I am confused about the exact difference between them. See attached photo. Because a compression force is applied,...

17 June 2024 5,344 2 View

How to add geosynthetics in SEEP/w (product of GEOSTUDIO)?

how to define geosynthetics in SEEP to calculate its effect on drainage characteristics

08 February 2024 5,684 1 View

Abnormal Gamma Prime formation during rafting?

Hello everyone, I am currently working on the single crystal alloy CMSX-4 and I am interested in the formation mechanism of elongated gamma prime rafts that form during the creep rupture test. The...

01 February 2024 3,157 0 View

Does Abaqus have creep + failure analysis?

Hi, I am interested in performing crack initiation and propagation analysis considering high-temperature creep for metals using Abaqus. I know that Abaqus has creep analysis capability with...

18 December 2023 6,027 3 View

What is the process of calculating Andreds primary creep power law constants β and k?

I have creep test data of time and strain during creep test under constant load in low temperature ( T< Tm). The Strain vs Time curve show that there is primary creep occurring in the sample....

28 November 2023 8,987 1 View

Wood-steel connection in ABAQUS - Error: The plasticity/creep/connector friction algorithm did not converge at 'n' points" - how to solve?

Hi, I'm trying to model a wood-steel connection in shear in ABAQUS CAE, but I'm having some troubles with convergence as the model aborts after running some iterarions. It gives a series of...

19 November 2023 8,008 9 View

What are the effects of increasing fiber content on compressive creep or tensile creep of UHPC?

Fibers, such as steel fibers or synthetic fibers are used in UHPC matrix to improve its tensile properties. What are the effects of increasing fiber content on compressive creep and tensile creep...

18 November 2023 8,447 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close