By using the Narda SRM 3006 device to measure electromagnetic radiation:
-What is the period of time required for each location or spot to measure?
-How can I insert and name frequencies whether for radio broadcasting, television, mobile communications and wireless communications?
- What are the conditions required necessarily when measuring?
- Some researches say that a person should turn off the transformer while measuring. Other researches say that a person can receive a phone call during measuring. Though I think that switching the mobile off is the right choice. So, What do you think?
-Finally, can we transfer data from the device to the computer in a form of an excel file?
I hope the experts in this field answer me please
The device senses the electromagnetic radiation by an antenna and amplifies it by a wideband low noise amplifier and then a fast Fourier transform to analyse the frequency spectrum and display it on a screen. It can acquire the field strength in a real time as the stated in Data sheet.
Since it is a wide band electromagnetic sensor one must turn off all interfering sources as the instrument will sense it.
For more information please follow the pdf: http://www.testequipmenthq.com/datasheets/NARDA-SRM-3006-Datasheet.pdf
We mad a similar set up to sense the EM radiation: Article DEVELOPING FRONT END WIDEBAND SPECTRUM SENSOR FOR COGNITIVE RADIO
Hi,
SRM-3006 Selective measurement of high frequency electro- magnetic fields. Complete, easy to use test system, consisting of a base unit and measuring antennas, for non-directional detection of fields and their sources in the frequency range from 9 kHz to 6 GHz.
For more info..
https://avalontest.com/narda-srm-3006-selective-radiation-meter/
- Badges
- Science topic