how to choose a element for concrete & Rebar in Abaqus?
Can anyone give an idea about the latest research topic in Structural Engineering field ?
11 December 2018 4,594 4 View
how can I use Cohesive behavior, damage initiation and damage evolution??. surface based cohesion behaviour cannot supported in explict analysis?
03 April 2017 3,759 2 View
I Used a zero thickness cohesive element between a rebar and concrete. CDP, cohesive materials properties(damage for traction seperation laws) are used in the analysis and displacement control...
02 March 2017 10,607 2 View
Hi everyone. I have a problem to model concrete crack in abaqus.I use Concrete Damaged Plasticity (CDP) in my model, I can run my model but I can not show the crack pattern.I read one paper, and...
01 February 2017 3,233 3 View
i need to show the cracks in reinforced concrete due to direct tension test. Is it possible in abaqus?
31 December 2016 7,297 4 View
It is difficult to apply a force on nodes ? anyone give an idea...
10 November 2016 9,105 8 View
Is it possible to view the cracks in Ansys Workbench?
10 November 2016 5,270 2 View
Is there any step by step procedure for FE modelling of tension stiffening Prism in Ansys software ?
09 October 2016 9,396 0 View
1.How the tension stiffening mechanism will work ? 2. define tension stiffening ? and tension stiffening effects?
09 October 2016 5,643 1 View
how to resolve this problem ? (An error occurred inside the SOLVER module: general error.)
09 October 2016 9,323 0 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I want to know more about REE deposits.
03 August 2024 6,930 2 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
31 July 2024 7,366 1 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View
