I am trying to calculating the amount of adsorption of specific gas from a mixture of gases on a adsorbent(solid material)like zeolite, activated carbon. The adsorption process takes place by varying the pressure(Pressure swing adsorption).
The adsorption of gases on solids depends on the activation of the solid absorbent. The adsorption capacity is measured using static or dynamic methods. The static method is based on determining the difference between the concentration of the adsorbed component in the initial solution and in the solution, which is in equilibrium with the adsorbent.The formula Qe = (C0 − Ce) × V/m was used during the test to calculate the adsorption capacity. Here, C0 and Ce are the concentrations of Sb(III) before and after the adsorption, mg L−1, respectively; V is the volume of the Sb(III) solution, mL; m is the adsorbent dosage, mg. Isothermal adsorption test.
https://link.springer.com/article/10.1007/s42452-020-2298-y