How the air starvation issue can be assessed for blowers contained inside a closed chamber?

06 June 2013 0 10K Report

How to ascertain, if there is a sufficient supply of (inlet) air for the blowers. Supposed we have 10 blowers inside a closed chamber (with single door) working independently i.e. neither connected in series or parallel, providing outlet through the rooftop for some cooling purpose.

How can we check the mutual effect of blowers over each other?

Badges
Science topic

More Ishant Jain's questions See All

How can I model ohmic contact between two metal junction in ANSYS?

If we have a conductor ( Al ) placed on a metallic strip ( Say copper ) - How we can define the contact resistance of the junction so formed in ANSYS Maxwell ? For simple geometry, we can define a...

06 July 2015 5,916 1 View

How does the change in thermal conductivity of the gas (say Air and Helium) affect the cooling rate, in the absence of magnetic field?

Take the velocity of the gas as very high (900m/s).

05 June 2013 1,197 1 View

Can anyone help me to understand the concept of moving mesh in COMSOL?

How can I track the change in properties of a point on an object moving along a scale of 10cm with some velocity? Say, for example, a wire is subject to continuous heating inside a heat exchanger...

01 February 2013 2,247 2 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View