How i determined the inorganic/organic ratio of sludge producing after any treatment of wastewater ?

More Dushyant Kumar's questions See All

What is electrochemical degradation index ?

I am working on electrochemical treatment of wastewater. please explain the Electrochemical degradation index how to calculate it or give me the related article

04 May 2016 3,836 2 View

Can someone suggest model compounds related to pulp and paper industry which may cause the higher COD if they are present in effluent ?

Pulp paper making process uses a kind of chemical compounds and most of them comes in effluent, discharge by industry. Please suggest me the name of some compounds which is responsible for higher...

11 December 2015 4,901 5 View

Someone suggested to me that where I got up the Design of expert free download?

I want to work with response surface methodology for the optimization of the treatment conditions of wastewater, for this i required design of expert is Stastical tool. please any told me that...

06 July 2015 6,393 2 View

How can i measure the surface area of electrodes?

I am making a metal electrode 5x 8.5 cm for treatment of waste water.

11 December 2013 10,082 5 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

Basis set and input instruction to calculate HOMO and LUMO using Orca for Imidazolium based organic salts?

Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...

09 August 2024 5,444 7 View

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Muhammad Imran

Dear Dushyant Panwar,

you may dry the sludge sample first then proceed it for Ash test in the muffle furnace as per standard procedure. All the organic components will be burnt out in the test remaining will be the inorganic constituents in the form of Ash.

Regards.

Dushyant Kumar

Thanks sir...