Hello! I want model a group of tubes in a cube with gambit and fluent. in this cube also there are fins vertical to tubes each 3 mm. so i must draw 5000 fins vertical to tubes. if there was a fixed temperature for tubes i could use symmetry but there are no symmetry to use because temperature of water in tubes change along tube.How i can model this ?
Hi Behrooz,
Why don't you use ANSYS workbench instead of GAMBIT for geometry modeling. Workbench is much easier to work with. And then use FLUENT solver.
Hope this helps you.
Rajesh
Exactly ! I will also suggest the same, that either try ICEM or Workbench to model complex geometries and also it provides lots of user options which is unavailable in gambit.
Dear Behrooz
It is impossible to produce unstructured in gambit for such a complex geometry
It is easier to use ansys workbench
As I currently work on similar project feel free to ak any question about it
If you are not families with work bench, Tohidi,s tutorial will be very helpful
you can download it from anystraining webpage
Bests
- Badges
- Science topic