Is it possible to send and receive messages from two boards to each other by means of serial communication? And then how to display the received waveform graph on the oscilloscope?
Serial communication is a data transmission communication that is carried out alternately or one by one. The serial communication is bidirectional and has fewer paths so that it saves more on pins and cables when compared to parallel communication. This equipment system uses serial communication as information storage. But in general the communication used is USART serial communication, 9.2.2.3. Capture and Spectrogram not recorded In a real time trigger condition has been confirmed and is armed instrument to emlai acquisition, RTSA sustainably input signal to view on triggering certain events. While waiting for this incident occurs, the signal is constantly digitized and time domain data turn off via incoming first time, take propped issued first the longest data clearing as new data later collected