I'm will be performing column adsorption experiment. Can one assist on how to do adsorbent column packing to give a desired bed height. Most often bed height changes on contacting with the adsorption solution. Thx
It depends on your adsorbents, but for sure all of the column before using for adsorption studies the column is filled with deionised water for specific time and then it is eluted it remove the air voids and finally you have a constant bed height. And this is known as packing
It depends on your adsorbents, but for sure all of the column before using for adsorption studies the column is filled with deionised water for specific time and then it is eluted it remove the air voids and finally you have a constant bed height.