Hi
I have generated a STL file of a skull using 3D slicer. I would like to convert my STL file into a cad model, so I could split it up into smaller pieces so that it can be printed piece by piece. My initial attempt was using Geomagic Design X where I had imported the STL file. However it seemed as if the skull was too organic/complex for the software.
Does anyone know how I can convert the STL file into a CAD model, or maybe another technique as to split the slit in parts?
Thanks for your help
Maybe using Fusion 360 may be the easiest, haven't tried my self but seems to be a lot of tutorials online: https://www.youtube.com/watch?v=KFQ4-1GH0wg
In 3D slicer use a subset of slices to create smaller STL sections. For example if you have 100 slices. Take slices 1 to 25 to create STL section 1, then take slices 25 to 50 to create STL section 2, next take slices 50 to 75 to create STL section 3 and finally take slices 75 to 100 to create STL section 4. You may want to also check if your STL files are watertight, because if your object is complex it can introduce holes or flipped facets in your output STL. Lastly you may want to decimate your STL file if you have a huge number of facets. Hope this helps.
U have many softwares like Ultimaker CURA 4.0 (Open source ) to convert *.stl into *.dwt files also AutoCAD,SOLIDWORKS etc.
I am using Blender (open source). Create thin rectangle and cut the model in desired plane.
Two options are available: online through the free tool or using Blender.
As well as much as I know if you have Fusion360 you can do it over there.
Here is a link into the steps if you haven't seen them already before: https://all3dp.com/2/stl-to-dwg-how-to-convert-stl-files-to-dwg-autocad/
hope it helps!
- Badges
- Science topic
- Similar topics
- Biological Science
- Bioecology
- Systems Ecology
- Landscape Ecology
- Connectivity