Which simulation softwares can be used for designing a traveling wave tube?

Can anybody guide me towards a simulation software that can be used for designing traveling wave tubes? Any views about COMSOL multiphysics?

11 December 2017 9,946 2 View

How can I measure voltage at the port of an antenna in HFSS?

I have a plane wave incident on a horn antenna and would like to measure the voltage at the port of the antenna? How do I go about it? Waiting for some input.. Regards,

03 April 2017 5,897 9 View

What is optimum height and width of a rectangular port in HFSS?

Hello, I have a confusion with assigning a port in HFSS. What should be the height and width of the port for printed antennas, lets say a patch antenna or any other antenna. When I keep the width...

02 March 2017 4,223 4 View

How do I design phase shift array using circuit elements to control the pahse shifts?

I am interested in designing a beam steering planar array and would like to know a few techniques to introduce phase difference. I know a transmission line of different lengths could be used to...

05 June 2016 4,769 6 View

How can electromagnetic band gaps (EBG) be used efficiently for patch antennas?

04 May 2016 1,747 5 View

How to use "Activate slit condition on interrior port" in COMSOL??

I am designing a simple pyramidal horn antenna in COMSOL without using symmetry planes. When I try to excite it using a rectangular port it says I need to activate the slit condition. I am not...

01 February 2016 1,757 1 View

How do I set up free convection in comsol?

I want to see the effect of free convection on a patch of water enclosed inside a solid (Calcite) when it is heated by a dipole antenna. Currently, I am simulating the antenna in a separate study...

10 November 2015 5,777 2 View

How do I model conduction and convection in heat transfer in solids interface?

I am trying to model heat flow in a material using the Heat Transfer in Solids interface of COMSOL (5.1). I would like to include conduction and convection as well. Guidance needed for a new...

08 September 2015 1,340 5 View

How do I find 3dB bandwidth in COMSOL?

Hello, I have simulated an antenna in COMSOL. I got the radiation pattern and now I am interested in finding the 3dB beam width of the radiation pattern. Any suggestions? If it is not clear from...

08 September 2015 9,545 2 View

How to solve Convergence error due to singularity in COMSOL?

I am trying to model heat flow in a solid material. I am using periodic ON/OFF of the Electromagnetic source (Antenna), via a rectangular pulse. The pulse is ON for 12 hours and OFF for 12 hours,...

08 September 2015 9,636 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View