The project includes simulations of MISO, SIMO, and MIMO configurations in 5G. I want to know if NetSim can support these setups. Also, can NetSim simulate both SU-MIMO and MU-MIMO, or is it limited to SU-MIMO only?
NetSim can simulate MISO, SIMO, and MIMO configurations in a 5G environment. You can configure the number of transmitting and receiving antennas to experiment with various MIMO setups. For instance, in a SIMO configuration, you can set the Tx Antenna count in the 5G RAN interface of the gNB to 1 and vary the Rx Antenna count in the UE from 1 to 16.
I think NetSim is only capable of simulating SU-MIMO as part of its 5G functionality.
In the documentation available at www.tetcos.com/downloads/v14.4/NetSim_Experiments_Manual.pdf
you can look through
10.1 MIMO Beamforming in 5G: A start with MISO and SIMO
10.5 Performance of OFDMA SU-MIMO in 5G
10.7 MIMO Communication: Channel Matrix Asymptotic Analysis
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Energy