What is the etch reagent for showing grain boundaries of Al matrix in deformed Al A390 alloy?

I tried some etch reagents like Keller, weck and HF but I couldn't see the grain boundaries of Al matrix.

07 August 2017 2,786 2 View

What are the suitable solvents for the ABS and PLA?

01 February 2015 5,063 7 View

What is the color of Al2O3 particles in an Al matrix composite in an image from a SEM?

06 July 2014 8,031 21 View

How can I disperse Al2O3 powder in molten Al A356 in compo-casting method?

Al2O3 particles don't have wettability with molten Al. They float on the surface of the molten without any change in structure of particles.

31 December 2013 4,970 7 View

Is it necessary to do heat treatment Al2O3 particles in inert gas to improve wettability of Al2O3 powder in molten Al ( compo-casting method )?

I want to know that i can do heat treatment Al2O3 particles ( 900 deg for 2 hrs ) without inert gas ? because i don't have this instruments for inert gas in the furnace.

31 December 2013 4,102 6 View

How can we inject Mg powder into molten Al in compo-casting method?

I'm working on MMCs with Al2O3 reinforcing particles in Al matrix. In articles it is mentioned that for better wettability of Al2O3 with molten Al it's effective to add Mg powder. How can I avoid...

31 December 2013 346 1 View

What is the dynamic recrystallization temperature of Al A356?

Al A356

31 December 2013 7,314 2 View

Why do Al2O3 particles not disperse in molten Al A356 matrix?

I did several experiments for dispersion of Al2O3 particles in molten Al A356 matrix but I couldn't catch any results, heat treatment of Al2O3 in 900 deg for 2 hrs and another experiment in 400...

31 December 2013 6,832 5 View

How could we dissolute Al2O3 particles in Al A356 molten?

According to articles I've added 5 percent alumina to molten (aluminum) but the amount of dissolution were low and it were exposed a lot of powders on the surface of the molten. I can't...

11 December 2013 520 8 View

How I can install catia V5R21 in Windows 8.1?

I've tried more than once but I can't install that. Does anyone have an idea why this keep happening?

10 November 2013 7,095 8 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

Anyone plz suggest relevant topic for research in image processing+Deep learning.?

I have selected brain tumor images ...but now found that already lots of research done n this topic.

03 March 2021 5,774 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View