Give some Reference Paper if possible
What are the most effective strategies for mitigating the effects of dust and other air pollution on CSP power plant mirrors and other components to ensure optimal performance over their lifetime?
10 June 2023 337 0 View
How can the efficiency of a CSP power plant's steam turbine be maximized given variations in solar resource availability and changing operating conditions?
10 June 2023 9,346 1 View
What are the most effective strategies for mitigating thermal losses and maintaining the performance of a TES system over its operational lifetime? How can these systems be designed to minimize...
10 June 2023 8,243 3 View
What is the optimal size of a solar collector for a CSP power plant and how does it vary based on factors such as geography, climate, and solar resource availability?
10 June 2023 5,883 1 View
What are the most effective materials for use in the construction of a CSP power plant's thermal storage system, and how does their performance change over time with extended use and exposure to...
10 June 2023 1,060 0 View
Some key design considerations for developing a high-efficiency CSP power plant should be considered, what are they?
10 June 2023 9,107 1 View
What are the most effective system control algorithms and strategies for managing the hybrid operation of a solar-gas combined cycle power plant, and how can these be optimized for maximum...
10 June 2023 6,577 0 View
How can optical design and system layout be optimized to increase the concentration of solar energy onto the heat transfer fluid and improve the overall efficiency of a CSP power plant?
10 June 2023 7,137 1 View
Let's say a heat transfer fluid in parabolic trough collector has a maximum working temperature 590 degrees celcius. How do we control it to have exactly 500 degress in the outlet of the collector?
10 June 2023 5,521 3 View
What are the key technical challenges associated with integrating a solar field into an already operational combined cycle gas turbine power plant, and how can these be addressed in a...
10 June 2023 9,234 1 View
I modelled a 3d truss with one storey concrete structure attached to it as shown on the model. I know that the one storey concrete structure changes the rigidity and the flow of the forces on the...
02 January 2024 6,810 1 View
The deformation state of the given truss due to the loadings 𝑃𝐻 and 𝑃𝑉 (acting at node 3) shall be investigated with the help of the finite element Compute the nodal displacements using the given...
17 December 2023 7,561 0 View
Hi everyone, I have a question about position of a part in Abaqus, in particulary i have to place my beam element between two reference point (RP1 and RP2) to simulate a ligament between two...
11 November 2023 7,181 7 View
Hi there, I need help improving the interaction between beams and shell components that represent the bolts in the structure that I have built using Abaqus for a truss bridge. In particular, I...
10 November 2023 7,453 1 View
In the context of structural engineering and applying evolutionary computation, I have found that in some truss problems the solutions tent to a local optima. how this problem is avoid?
05 November 2023 6,128 1 View
I am attempting to complete a fully coupled thermal-stress analysis in ABAQUS on a truss structure. I see in ABAQUS documentation that the thermally coupled truss can support surface flux and...
14 October 2023 1,196 0 View
Hello everyone I'm modeling a steel-reinforced coupling beam in DIANA which is embedded to an adjacent shear wall. I want to model rods in the embedment region, which only transfer axial loads...
17 September 2023 5,640 2 View
Hello.I am running a simulation on the stress distribution over the airship envelope and try to analysisthe effect of adding more cable on the envelope body to decreas the overall stress. I am...
02 August 2023 8,086 0 View
Hi! I am checking the structural integrity of an existing trussed tower ( 17m high ) using SAP2000. I found out that the main angle bars used are not within the provision for seismically compact...
04 July 2023 9,566 1 View
I want to get this type of Force Displacement curve. Which analysis would be accurate like Static General, Dynamic explicit or implicit etc? Note - It's a Reaction force vs displacement graph not...
27 June 2023 4,033 3 View
