how can determine start-up, steady state and hot-topping stage in VAR process? and what way does reducing hot-topping ( forming convex shape in top of ingot) stage for Ti-64 melting?
Is a person with a history nodular gastritis, which has been through nodular regression (according to endoscopy) because of sucessful H.pylori treatment, has the same prognosis as a person with no...
20 May 2024 4,192 0 View
For a ship panel, I want to consider the initial deviation (thin-horse mode) to have a better analysis. How can I apply initial deviation from Rigo method in Abaqus?
19 May 2024 1,358 1 View
The question inquires about the potential use of the sol-gel technique for producing fiber preforms (rods) and whether its application is limited solely to volume optics. The sol-gel technique...
15 May 2024 9,211 0 View
One of the most important analytical tools often used by management executives for decision making is decision tree analysis. The most well-known approach to solve decision tree problems is the...
08 May 2024 6,619 4 View
I want to know how peak and rms current of diodes and capacitors are calculated in terms of output current? if you know good reference with details, please share here or tell me.
04 May 2024 6,277 1 View
The question is about the safety mechanisms in place within a car battery pack to manage and reduce pressure after a cell explosion. This is a critical aspect of battery technology, particularly...
18 April 2024 3,376 1 View
what are more desirable journals for Russian researchers in structural engineering field to submit their papers? thank you.
13 April 2024 5,004 2 View
Hi, What is this organism? I found it in Quaternary sediments!
25 March 2024 8,298 7 View
Guidance, navigation, and control systems are used in many vehicles to achieve precision, reliability, stability, mission path planning, and ... . what are the primary objectives of GNC systems...
24 March 2024 5,946 3 View
Hello, Which are some AI tools that researchers can use in writing scientific paper?
23 February 2024 1,792 4 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
Hello dear colleagues, We have prepared a manuscript on NiTi-based alloys and are seeking a second opinion on our current TEM results. If you are a Ph.D. holder with experience in TEM and have...
07 August 2024 9,563 0 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
How select composition for ods-high entropy alloys?
31 July 2024 2,795 1 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View