Understanding nature of bonds between powder particles
I am facing difficulties to insert the pile in soil layer and define the pile exactly through Flac-3D code.
22 June 2024 8,334 1 View
Is there any book or article on what are the elements of a building, with definitions, types/ categories, materials, construction, common defects/ problems of each e.g. walls, floors, staircase etc.?
19 May 2024 8,346 1 View
Respected readers, I am working with a totem pole PFC circuit. In an experimental study, I face a problem of high-frequency notches in source voltage (Yellow one). I found an explanation behind...
14 May 2024 6,692 6 View
Davenport wind spectrum can calculated through software, but I couldn't understand how it is implemented on a structure through software application. if anybody could enlighten me, it would be a...
05 May 2024 9,728 3 View
We have grown boron nitride with a monolayer thickness. XRD usually is used to understand the polymorphism of any material. However, due to the minimum thickness of the sample, it won't work for...
15 April 2024 5,431 1 View
I have deposited chrome on the glass wafer. Then I applied a dielectric layer of SU-8 over it. After that to make the surface hydrophobic, I applied Teflon by using spin coating. However, I found...
12 April 2024 7,009 3 View
To prevent intestinal disorders, probiotics can be rendered multidrug-resistant to survive in the presence of co-administered antibiotics, and they may also transmit the antibiotic-resistance gene...
01 April 2024 8,043 2 View
Hi everyone! I want to isolate the PBMCs from AML patients and transduce the cells with my lentivirus to knockdown a protein and use for further experiments. I am unable to find a single widely...
14 March 2024 4,317 0 View
How to plot Raman mapping data in origin software?
27 February 2024 9,522 0 View
is wind spectrum consume mean wind and turbulence both ? and how the mean wind will be calculated from measured wind data?
04 January 2024 8,546 2 View
Hi all, my experimental XPS results shown that my C3N5 sample consists of N-H bond, hence in this case I should incorporate the N-H bond into my DFT modelling. However, I do notice several papers...
07 August 2024 8,414 2 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
average particle size calculation from TEM
04 August 2024 2,921 1 View
TEP presentation caption (The Environmental Project) Re: Why should Washington’s DC, or any country government point of location think of as nowadays of as to being 'tomorrow as to come! if it...
03 August 2024 2,484 1 View
Dear Researchers I need to know, how to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field data in Tecplot? Thank You
02 August 2024 3,615 1 View
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View
The delta function seems produce logical contradictions when analyzed on a fundamental level. I would be curious if anyone else agrees.
31 July 2024 10,109 3 View
I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...
23 July 2024 9,938 1 View
The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.
23 July 2024 3,205 0 View