Dear all members,

I am focusing on some developments in Aesthetic large area coatings for applications in fields of solar control, architectural, automotive, and window applications.

In general, the low emissivity coatings will consist of a metal layer (which is used to reduce the near and far IR radiation from Sun). So to do such high precise design coatings people, engineers, researchers use high and sophisticated coating equipment from PVD and CVD.

Apart from the Low emission of IR light, the other requirement is to develop high transmission. It can be possible by incorporating semiconductor Dielectric layers sandwiched between the silver or any metal layers.

To produce such high-end products from industries it has to pass several rigorous tests like wet abrasion, humidity, conductivity, optical and thermal performance, etc.

In these regards can anyone suggest which materials and how the design and devlopments of such products can overcome the problems of silver layer damaging during muffle condition, no proper adhesion of layers, etc.

Kindly guide and help in these issues in developing the large area aesthetic glass coatings.

More Vemuri Sri Ranga Sai Praveen Kumar's questions See All
Similar questions and discussions