I am looking for a material which can hold hydrogen.
Hydrogen must not absorb in.
And must not transfer to surround.
borophene
Hello, I'm looking to dissolve soy lecithin in order to create a liposome. I've tried using various solvents like pure ethanol, methanol, and a mixture of ethanol and methanol but they didn't...
02 August 2024 6,980 4 View
it's my first time using NVivo software.
01 August 2024 9,304 5 View
I have collect a LSV data by taking SCE as the reference electrode. But I want to convert this one to Potential with respect to Reversible Hydrogen Electrode. Please suggest me the required...
13 July 2024 7,841 2 View
I'm using Dorsomorphin (C24H25N5O) as one component in dual SMAD inhibition of pluripotent stem cells to differentiate into neurons alongwith SB431542. Now as to solubilizing 10mg SB in DMSO for...
11 July 2024 4,832 0 View
Is it a source for moisture factor in different plants? I need to find moisture factor (oven dry weight / wet weight) in plants in different studies.
10 June 2024 842 0 View
the autoclave has been smelly and seem likely yellow after my synthesis and this changes may effected on other synthesis, so I want to clean PTFE from all sulfur contamination that remain on...
31 May 2024 2,985 0 View
I have a lipopeptide solution that I intend to lyophilize in a few days. Should I put it in the -20 freezer or -80? Which temperature is best for maintaining its properties?
20 May 2024 3,893 0 View
Dear researchers, I'm currently conducting a direct cyclic fatigue simulation in Abaqus, but I'm encountering difficulties in analyzing the results. Despite the simulation running, I'm struggling...
04 May 2024 6,957 2 View
Hello. My polyacrylamide gel becomes cloudy after de staining with a solution consist of (50% miliQ water + 40% methanol + 10% acetic acid) and the background of my gel does not become completely...
02 May 2024 895 2 View
I seeded 30000 ReN progenitor cell on XF96 plate which coated with matrigel. I differentiate them for 2 weeks and read OCR with inhibitors. However nothing worked. FCCP and oligomycin were same...
17 April 2024 9,012 0 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
I heard an explanation about something being a better proton acceptor or lone pair donor but that doesn't make sense. I couldn't explain in in terms of acid-base theory. The hand-waving way I saw...
03 August 2024 9,918 0 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
Hello Everyone! I am trying to create a metal hydride system where I am trying to create a temperature control with the emphasis on measuring the concentration of the hydrogen with the hydrogen...
29 July 2024 7,577 2 View
For people today, the enigma of the size of the proton still remains enigmatic. However, being myself a researcher in new physical theory which makes it possible to extend the different standard...
28 July 2024 7,823 1 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am new to research. The boiling point of triethyl amine (NEt3) is 89 degrees centigrade. I am skeptical that when I will let the hydrogen escape which is getting generated in situ, I will also...
21 July 2024 7,284 4 View
Let me say I have a solar plant in operation and I want to build up a wind power plant, and later make a hybrid so that I could power the electrolyser as load for green hydrogen production.
14 July 2024 9,547 4 View