Hi, could anyone suggest the latest trends of research in electromagnetics, antennas and microwave engineering plz?

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

How to find ECC from radiation pattern on cst ?

i need to find ECC for 4-MIMO antenna using radiation pattern on CST

16 July 2024 7,291 1 View

What is the average energy consumption per gate operation with superconducting qubit?

Could you provide information on the average energy consumption per gate operation when using superconducting qubits, specifically focusing on the microwave power required to implement gates? I...

15 July 2024 954 0 View

What should I upgrade in my computer to speed up simulation in CST?

I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...

10 July 2024 2,789 4 View

How to know the TM/TE modes in antenna design in CST studio?

How to know the TM/TE modes in antenna design in CST studio? Example: TM01 ,TM02 ,TM10, TM12, TM30 like this... how can identify the antenna is operate the above said mode? can any one explain...

08 July 2024 6,609 2 View

How to give excitation to Crossed Dipole Antenna in HFSS?

I'm attempting to simulate a crossed dipole antenna. For excitation, I've placed a lumped port along each dipole. However, the resulting radiation pattern is similar to that of a single dipole....

08 July 2024 1,876 3 View

What CMB or normality?

No mention of CMB or normality

05 July 2024 6,629 1 View

Microwave assisted Solid Phase Peptide Synthesis resulting in problematic 'sticky' gel peptide product following centrifugation of diethyl ether?

I'm trying to synthesis a hydroscopic peptide using a microwave assisted solid phase peptide synthesiser. I'm using an already optimised cleavage process, the issue arises after precipitating the...

15 June 2024 2,728 2 View

How does the radiation box dimensions need to be calculated when making an antenna in HFSS?

#AntennaTheory

12 June 2024 5,935 5 View

How can I make the CST simulation run faster?

I am trying to simulate a metasurface of 24x24 elements, but even with a GPU of 48GB it takes very long to simulate. I want to obtain the field along the defined curve.

10 June 2024 3,577 7 View

Akram ahmed Mohammad

thank you,

would appreciate it very much if something is suggested for reading on these topics

thank you very much sir,

i really appreciate your support.

Abdulaziz Dessalew

1. Metamaterial inspired antenna.

2. Electromagnetic Band-gap Structure based antenna.

3. lens antenna.

4.Characteristics mode analysis and antenna based on CMA.

5.Antenna based on Fabry-Perot cavity.

6. Low Temperature Co-fired Ceramic technology based antenna.

7.Antenna based on Surface Integrated Non-radiative Dielectric Waveguide.

8.Evolutionary antenna design.