Any information on Radio Frequency RF Multi-threat simulator/scenario generator is required.

31 December 2015 1,657 0 View

What are the differences between SCADA and Internet of Things? Can these be integrated to make a new system?

What are the differences between SCADA and Internet of Things? Can these be integrated to make a new system?

07 August 2015 2,927 16 View

Anyone familiar with spherical wave modeling with dual polarized MIMO array?

Spherical wave modeling of MIMO channels has become important for future 5G networks. The reason is near field communication scenarios with massive MIMO. some work is done my METIS on this...

01 February 2015 4,414 2 View

Major differences in 4G and 4.5G wirless networks?

Can someone identify the major changes in Release 13 and 14 pf 3GPP from Rel 12 LTE Advanced. When the networks would be deployed.

01 February 2015 5,710 6 View

What is SOMA for 4.5G?

What is the SOMA(Semi orthogonal multiple access) considered for 4.5 G wireless networks.

01 February 2015 8,015 6 View

Would network densification in future 5G help in reducing cost or other way round? How can the cost be reduced?

Solving the capacity and data rate challenges with network densification could be very expensive in terms of equipment, maintenance, and operations in future 5G. In LTE and LTE-A most of the...

31 December 2014 1,552 4 View

Would FBMC for V2V applications be a good solution?

FBMC also has a potential to cope better than OFDM with doubly dispersivechannels when both the transmitting and receiving endpoints are moving (e.g., in a V2V application).

31 December 2014 4,780 3 View

Does anyone have information about Agilent N3520M DSPedia self-paced training DVD?

Agilent N3520M DSPedia self-paced training DVD DSP for Communications, Training Curriculum and SystemVue Resource DVD (5-user license)

31 December 2014 8,370 3 View

What is the acheivable Massive MIMO capacity?

If capacity varies with min of Mt and Mr where those parameters are the transmitting and receiving antennas respectively, then what is the capacity gain from gigantic number of antennas @ base...

11 December 2014 3,193 5 View

Would the use of SIM, E164 and TAC be still be valid for 5G?

From a regulatory perspective, as 5G networks are going to all-IP, it may be appropriate to consider alternatives to the use of SIM, E164 (international public telecommunication numbering plan)...

10 November 2014 2,196 2 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

Physics: Why do we describe light by referring to its wavelength, but microwaves and radar pulses by referring to their frequency?

In physics, the description of the properties of light generally refers to its wavelength (nm), while in the range of microwaves and radio waves we refer to the frequency of a signal (e.g. kHz or...

03 March 2021 1,682 3 View

Arena simulation - how do i model the following model in ARENA (see description) (new to ARENA)?

Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...

02 March 2021 2,431 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View