How to use One Class SVM for time series data?

One CLass SVM is a well-known machine learning algorithm for novelty detection, but it is applicable only for a set of vectors not for time series data. I read a paper recently of how to use...

17 September 2017 4,929 3 View

What is the best method to achieve high encapsulation?

I'm using water in oil in water (W/O/W) double emulsion. I was wondering what is the best method to encapsulate a hydrophilic compound? Should I dissolve the compound in the aqueous phase then...

31 January 2016 262 2 View

How to normalise data on OPM package from R Studio ?

Good afternoon, I recently used OmniLog from BIOLOG for my experimentations : I tested the metabolism of different strains on 2 types of plates. I have 16 strains of 3 different groups...

02 March 2021 3,584 1 View

How to plot the probability paper of Gumbel distribution using R programing?

In R-studio, there are many commands of Gumbel package. Arguments are also different. I`m asking about the alpha parameter of the Copula which must be greater than 1. If this is the one used to...

25 February 2021 5,229 3 View

Has anyone had luck using cell lines other than HEK 293 (such as COS1) to package lentivirus?

I am looking to package lentivirus in endothelial cells but I am opposed to using 293 cells due to personal ethics regarding the source. I have done some reading and saw that COS1, COS7, & CHO...

25 February 2021 3,030 1 View

No title

25 February 2021 5,713 1 View

Implementation of chance-constrained optimization problem via scenario approach?

23 February 2021 7,826 2 View

Fictitious Boundary Meshing Method (FBM) in Commercial FEA software?

Is it possible to implement FBM in a commercial FEA software package, such as FEMLAB, COMSOL, or open source software like Moose?

22 February 2021 2,968 1 View

Are there packages (R or Python) for simple models (bucket?) to assess soil water content?

Hi everyone. I am researching droguht effects on soil water drought. I am looking for already implemented functions in R or Python to estimate soil water content from precipitation,...

21 February 2021 2,084 1 View

How reliable are degrees of freedom for lme mixed models in nmle package?

I am running mixed models analyses because I have participants nested in groups. Across the different analyses, I have very different degrees of freedom in the lme output with nlme package (and...

09 February 2021 6,767 3 View

Schrodinger Desmond runs fine on one GPU, but crashes on other GPU?

Hi, We are having issues using Desmond on our workstation. Simulations run fine on one of our gpus ("Gpu0") but crash consistently on the other gpu ("gpu1" - which is also set up as the display...

01 February 2021 5,866 3 View

Which software is the best to model a non-linear concrete (ABAQUS, ANSYS,ADINA, ATENA, etc.)?

What is the best finite element modeling software packages for modeling non-linear and fracture analysis of CONCRETE? I've had some with ABAQUS standart/explicit, but I would like to learn if...

27 January 2021 330 6 View