Dear Colleagues,
I want to protect YBCO pellet from direct contact with liquid nitrogen. This is because the bare pellet when comes in direct contact with Liquid nitrogen, there is contamination of moisture on the surface of the pellet.
I want to coat the pellet with connection leads by an electrically nonconducting paint to avoid any external contamination.
𝙋𝙡𝙚𝙖𝙨𝙚 𝙨𝙪𝙜𝙜𝙚𝙨𝙩 𝙬𝙝𝙞𝙘𝙝 𝙥𝙖𝙞𝙣𝙩 𝙘𝙖𝙣 𝙗𝙚 𝙪𝙨𝙚𝙙 𝙛𝙤𝙧 𝙩𝙝𝙞𝙨 𝙥𝙪𝙧𝙥𝙤𝙨𝙚.
𝙏𝙝𝙖𝙣𝙠𝙨 𝙖𝙣𝙙 𝙍𝙚𝙜𝙖𝙧𝙙𝙨
𝙉 𝘿𝙖𝙨