Effect of calcination temperature on structural and magnetic properties of lightly lanthanum substituted M-type strontium cobalt hexaferrites

More Soham Suthar's questions See All

How to change material in ANSYS & perform brittle deformation ?

I am currently working on a model for fracture generation due to pressure applied in ANSYS. When I am working with structural steel material it is showing only folding not any fracture initiation...

16 December 2020 3,826 3 View

How to calculate absorption coefficient from the UV-Vis absorption data ?

How to calculate absorption coefficient from the UV-Vis absorption data

21 June 2020 6,670 27 View

Why is particle size measured with SEM is bigger than TEM?

29 May 2020 6,361 28 View

Is it possible to use Scherrer's formula to calculate crystallite size of spin coated thin film?

Is it possible to use Scherrer's formula to calculate crystallite size of spin coated thin film

24 May 2020 3,663 13 View

Is there a relation between XRD peaks intensity and material grain size?

11 May 2020 1,199 3 View

What is science behind amorphous phase in XRD but highly oriented morphology in SEM?

10 May 2020 4,402 8 View

Does vacuum annealing of thin film produces any gas in chamber?

When vacuum annealing of the film is carried out then what are the residual gases present in furnace and how it affects the physical properties of thin film.

02 May 2020 1,065 6 View

How makes a good solar cell?

how can I choose the best materials for photovoltaic system?

18 April 2020 1,334 16 View

Annealing of thin film of ZnTe on glass substrate?

What is the best temperature for annealing such film.I am going to use it for photo voltaic applications.

12 April 2020 6,453 4 View

How can I calculate the thickness of a thin film from UV-Visible spectrum?

10 April 2020 9,922 3 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

Zno nano particles colour changed from white to grey in process of calcination any suggestions?

In the formation of Zno nano particles process, after drying at 120 degree C, my zno nano particles are completely white but when i calcine it for 450 degree C it converts into grey colour. i...

26 February 2021 2,435 4 View

References for relative humidity created by salt solutions at different temperatures?

I understand that the ability of standard salt solutions commonly used to produce a certain relative humidity (RH) in a closed space changes somewhat with the temperature. Where do I find data...

04 February 2021 7,370 4 View

How to get mesoporous cobalt ferrite thin film on Pt/Si substrate by electrodeposition method?

We want to deposit a thin film of mesoporous cobalt ferrite using a surfactant on Pt coated Si substrate by electrodeposition. What is the procedure for it? Does KLE polymer useful for this procedure?

10 January 2021 467 10 View

Why isoelectric point (IEP) of alumina (Al2O3) dispersion decreases with the increasing of calcination temperatures?

We have prepared different alumina powders (fine/submicron-sized) from waste sources at different calcination temperatures (C.T.). From zeta potential-pH graph, we saw that IEP values decreased...

09 January 2021 9,404 3 View

Why a magnetic field oriented along spin axis cannot reverse spins in the sublattice of an antiferromagnetic in T = 0 K?

A permeability of an antiferromagnetic along the spin axis is zero in T = 0 K as it is written in any handbook of magnetism. Why a magnetic field oriented along spin axis cannot reverse spins in...

27 December 2020 7,513 6 View

How exactly does one magnetize magnetic tips for Magnetic Force Microscopy?

We have magnetic tips from Nanosensors (PPP-MFM- Reflex Coating). It is suggested that magnetization of the tip by a permanent magnet is necessary prior to the measurement. I have also found that...

03 December 2020 7,057 4 View

Why band gap energy of cobalt ferrites is increased with increased in zinc(dopinng element) concentration?

In most of cases band gap energy of cobalt ferrites is decreased with increase in Zinc concentration that is hold to brass model. But when energy band gape is increases with increased...

03 December 2020 2,439 3 View

Ferromagnetic material (nickel) is attracted to magnets. So, is even a single atom of nickel attracted to the magnet?

Is the single nickel or cobalt atom attracted to magnet? Thank you.!

02 December 2020 5,584 3 View

What is the difference between calcination and pyrolysis.?

please tell me in case of carbon material of metal oxide

09 November 2020 5,572 5 View