I want to know how is the reaction between this two kind of materials (if any reaction between them happens)
Is it safe or dangerous?
Hi Amir. There should be no reaction or incompatibility. DME is an aprotic inert solvent like diethylether or THF. It has already been used as solvent for Na/naphtalene for reduction.
Is it possible to break a π bond between a solute and a magnetic solvent using magnetic force?
31 December 2018 1,040 3 View
among the different types of hydrocarbons such as aromatics, aliphatics, naphtenics, etc which is more refractory to the oxidation process?
06 July 2018 6,334 8 View
among the different techniques for oil desulphurization (such as HDS, BDS, ODS, ...) which is more appropriate for heavy oil?
06 July 2018 4,343 3 View
which of the available techniques for desulphurization of the oil is more effective?
05 June 2017 3,040 10 View
i want to convert mass fraction to volume fraction. so i need density of the samples (graphene oxide and alkylated graphene oxide)
07 August 2016 9,655 2 View
i performed a MD simulation in NVT ensemble using berendsen thermostat, now, one of the reviewers says that NVT ensemble is based one Nose-Hoover thermostat not berendsen I got a little confused
01 February 2016 949 11 View
Is it possible to break bonds between for example C-C or C-H atoms, Using ultrasonication?
31 December 2014 235 0 View
Are there any nanoparticles which can decrease the viscosity of a liquid?
31 December 2014 5,352 21 View
Graphene is anisotropic and dimensions are different, so which dimension will be considered in DLS test?
10 November 2014 3,269 7 View
I want to render a polyester resin that is water soluble. What do I have to do? I know to use some materials like ammonia and amines but I don't know the procedure.
02 March 2014 1,483 1 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,420 1 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View