Is the SmartPIV algorithm an open source?

Hi, are you planning to release the smartPIV as an open source? if you're interested, we would be very much willing to cooperate, under the OpenPIV consortium, see http://www.openpiv.net - we are...

03 April 2015 2,962 1 View

Are you aware of the three-dimensional particle tracking velocimetry, also in real time?

Open Source Particle Tracking Velocimetry consortium is looking for the volunteers to help us to program, to run and to test the OpenPTV software. During the process you'll learn about the 3D...

11 December 2014 7,759 3 View

What do you think should be developed first: open source PIV or 3D-PTV?

What shall we develop first: an open source particle image velocimetry system, based on OpenPIV (open source PIV software, http://www.openpiv.net), open source micro-controller and LED light or an...

08 September 2012 7,449 1 View

Do you consider an open source PIV software? Do you develop also an open source (hopefully) controller?

Do you consider an open source PIV software? Do you develop also an open source (hopefully) controller/synchronizer?

01 January 1970 9,866 6 View

Is there a code that implements these important know-how?

01 January 1970 1,730 1 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Image Processing and classification using keras/Tensorflow?

Do you have some recommendations approaches on Image processing and classification of plant diseases using TensorFlow/Keras?

02 March 2021 1,493 4 View

Which SAR dataset to use for generating coherency matrix and performing target decomposition (Description) ?

Working on chandrayaan-2 DFSAR data, there are three datasets available: 1) Slant range image data product: The slant range complex image file. Each pixel is represented by two 4-byte floating...

02 March 2021 8,481 3 View