There are non destructive methods for measuring the chloride resistance. Do you advice such measurements?
Dye exclusion tests may be helpful? or measure GSSG leakage in the medium.
Shall we characterize by using non destructive instruments?
01 January 1970 5,636 0 View
Which tests will you use?
01 January 1970 9,215 4 View
I was used waste bottled in mortar and cement paste. What do you think about the powdered form?
01 January 1970 1,106 0 View
Is there any limitations for measurements?
01 January 1970 1,147 4 View
What was the mix design parameters in the project?
01 January 1970 8,800 4 View
Do you consider testing periods after 56 days?
01 January 1970 2,359 4 View
what do you think for the chemical resitance of the waste ceramic materials?
01 January 1970 8,384 4 View
Shall we used as a cement replacemet?
01 January 1970 7,069 6 View
shall we use non destructive methods?
01 January 1970 281 2 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
Are there any statistical methods to justify your sampling technique using SPSS or AMOS?
05 August 2024 9,153 4 View
Better ways to analyze the qualitative and quantitative data in a sequential explanatory mixed method approaches
04 August 2024 2,703 6 View
I am using a Bruker 600M solid-state NMR spectrometer with a Micro 2.5 microimaging system. The test sample is a tube of 1M LiCl aqueous solution, and the nucleus detected is 1H. I am trying to...
01 August 2024 9,227 1 View
Just bounced on me. Before statistically analysing significant difference, shouldn't we see if data fits normal distribution first? Is 3 replicates enough to testify the hypothesis of normal...
31 July 2024 8,141 13 View
I am currently considering a research project focusing on a comparative analysis of starch metabolism in orchids and roses. I am particularly interested in identifying the types and quantities of...
30 July 2024 4,267 2 View
Can an analytical method's limit of quantification (LOQ) be outside its linear dynamic range, or is it always required to be within it? Please provide a thorough explanation supported by verified...
29 July 2024 7,198 9 View
Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco
29 July 2024 2,163 1 View
Employing a pragmatic inquiry research design, looking for published research using this method, employing qualitative research data collection methods of semi-structured interview and focus...
28 July 2024 540 2 View