do the n type oxide become p type semiconductor ?????
it is an important and interesting study
What is the best measurement method to determine bulk concentration, resistivity and mobility of thin films?
01 January 1970 7,127 12 View
how to make a bridge between physics-technology and mathematics? How to motivate freshmen at the university to explain physical phenomena through mathematics and technological applications in...
01 January 1970 1,615 0 View
front metal contact (Ag, Al or Au) solar cell such Ag/SnO2/Si/Al
01 January 1970 535 9 View
It is often that we report mean values or approximate values of grain size, band gap, measured current or any other parameter. Therefore, the researcher take directly values from papers and...
01 January 1970 7,577 0 View
Can we use Density functional theory to explain the conductivity type inversion inside semiconductors?
01 January 1970 7,902 0 View
from n type to p type inside thin layer semiconductors based on oxide
01 January 1970 5,754 2 View
can anyone say which is the suitable synthesis method for p type ZnO thin film
01 January 1970 3,844 3 View
MPc are metal phthalocyanine organic molecules.
01 January 1970 6,112 1 View
AZO is Al doped ZnO used in CZTS solar cell.
01 January 1970 8,331 6 View
in aim to enhance current in contact of solar cell
01 January 1970 2,156 0 View
When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...
03 March 2021 4,892 5 View
In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?
01 March 2021 1,923 3 View
It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...
24 February 2021 5,974 4 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...
23 February 2021 9,799 4 View
What does the color of a spiro-ometad film indicate? I got purple, green, red, even black color of the spiro film. Is there anything we can get from the preliminary color analysis(e.g. oxidation...
21 February 2021 1,831 4 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View
I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...
17 February 2021 8,104 4 View
when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...
14 February 2021 5,778 9 View
i have the enzymatic antioxidant assay by following the method of Misra and Fridovich, 1972 for super oxide dimutase and Luck, 1974 for catalase assay can any help me how to the calculation for...
11 February 2021 2,241 3 View