Hello
I a question has about CST simulation software.
I designed several types of filters and I want to compare the amount of output beam intensity filters.
Radiation of passing percentage is equal to the amount of output Radiation divided by the primary beam multiplied by 100.
This the amount must be less than 100, but in simulations I, this amount is lot more than 100.
In your opinion, what is wrong with my simulation?
if this is there go for debugging with the simulation tool and after step by step verification you will able to detect the error.
Thank You
Dear Ahmad sajedi bidgoli, CST MICROWAVE STUDIO(CST/ MWS) is a specialist tool for the 3D EM simulation of high frequency components. CST MWS unparalleled performance is making it first choice in technology leading R&D departments.CST MWS enables the fast and accurate analysis of high frequency (HF) devices such as antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects. Exceptionally user friendly, CST MWS quickly gives you an insight into the EM behavior of your high frequency designs.CST promotes Complete Technology for 3D EM.Beside the flagship module, the broadly applicable Time Domain solver and the Frequency Domain solver, CST MWS offers further solver modules for specific applications. Filters for the import of specific CAD files and the extraction of SPICE parameters enhance design possibilities and save time.
dear christo Ananth
I with CST design antenna and filter.
In these simulations was a good result about the antenna and I achieved acceptable results about the filter.
But I wanting to review the intensity of the output light of the filter for various examples. I run into trouble.
In examining these cases percent of the output light of the filter is more than 100 that is unacceptable
- Badges
- Science topic
- Similar topics
- Engineering
- Computer Engineering