Concrete Mix Design - Estimating Volume of Concrete?

More Faris Rashied Ahmed's questions See All

What is the concrete strength comparing to soil strength?

The bad concrete strength is about 20 MPa, while the very good soil strength is about 200 kPa, Is that means the bad concrete is harder than the good soil by at least 100 times?

11 December 2018 2,433 0 View

Is it right that if we increase the concrete strength, we have to increase amount of reinforcement into the section? why?

Some of the engineers say that we do not have to increase concrete strength, which will make the section needs more reinforcement!

07 August 2014 2,227 8 View

How to calculate BREQ 3 questionnaire?

how to calculate BEHAVIOURAL REGULATION IN EXERCISE QUESTIONNAIRE BREQ 3 ,which contain 24 questions and each question has 5 answers (0- Strongly disagree , 1-disagree, 2- Neither agree nor...

02 March 2021 811 3 View

I am interested in medicinal chemistry field, which books are highly recommended to learn from?

I am at the beginner level in drug design and drug discovery, and I am interested to learn more about this field. Which books are highly recommended to start from and gives me all essential...

02 March 2021 8,437 2 View

Please suggest a good text book for "Research Methodology in Life Sciences". Which book would be good for PhD Scholars?

Please provide Book Title and author name

02 March 2021 9,059 3 View

Could any one guide me, to write research proposal for grant? ?

We have one plant, the local people using this for controlling blood sugar, the toxicity and antidiabetic activity of the plant is not reported yet, please guide from whag should be the process ?...

02 March 2021 2,300 1 View

What is the procedure to determine the permeability of concrete?

can anyone help me in this, it will help me with my research work

01 March 2021 834 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to separate water from glycerol solvent in a solvent recovery vacuum distillation column?

I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...

01 March 2021 9,525 4 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

Apart from Nanosilica and CNT's what are the other nanomaterials readily available to use in concrete mixture?

Nanotechnology in concrete materials

01 March 2021 3,379 3 View

Why is the sum of the elements in a row in a Q matrix equal to zero?

When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?

28 February 2021 3,864 3 View

James Rodd

Hi Faris

Please find attached the spreadsheet I designed for this purpose. It can be appropriately used for the construction applications which the total volume of each batch needs to be determined.

If you are not sure about the specific weights of cement, sand, and gravel, you can use the default values provided in the spreadsheet .

Once you have entered all weights of concrete constituents, the total volume of the batch would be calculated automatically in both litre and cubic meter.

Faris Rashied Ahmed

Thank you very much Mr. Iman.