What kind of components or parts would you need to the drone, if you would like to communicate or oversight the third person?
Currently I used micro controller platform to see if I can connect the pins to both radio and first person view system using TX and RX.
but I was wondering if there is way to install radio system inside the drone or find the some parts i could connect to micro controller platform pins, so third person can hear when user is talking.
I was searching for the components, that could be installed, and I am vague but what to use, and it seems lots of considerations.
Please give any advice or insights, I am vague with the concepts and hard to verify with my assumption for myself.
using drone requires a license !!!!
Ask : Alan Perlman
Founder, UAV Coach // Drone Pilot Ground School
Thank you, Ms. Murthy, :) but the e-mail or the school you suggested does not give the components or theories, I am looking for. They only tell you the regulations, and laws, and how to control it. :) but I will definitely take a consideration, if I need to take the license. Thank you very much. :)
From what I understand , it is not a component(s ) Fa, you need look at integrating functionality (board based) . If you want , Chinese manufacturing sales person (from my linkedin) , Ms Helen Lin , sales at Innoquick electronics Limited & Inno Circuits limited .
You can ask for prototyping cost and look at designing +integrating the boards. (it is cheaper with Chinese manufacturing )
http://www.robotshop.com/blog/en/make-uav-lesson-1-platform-rtf-arf-kit-custom-13989
Hi Fa Shin,
Take a look at this video.
Thankyou
https://www.udemy.com/drones-step-by-step-to-build-and-fly-a-racing-quadcopter/
- Badges
- Science topic
- Similar topics
- Engineering
- Electrical Engineering