Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Does any one can help me choose a reasonable basis set for intermediate metal ions interactions with guanine (i.e Fe2+, Mn2+, Cu2+ and exc.)?

Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...

01 March 2021 6,187 2 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

How can we theoretically calculate Elemental analysis(percentage) of atoms in covalent organic framework?

For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...

24 February 2021 1,265 6 View

Is there any teachers based in UK who would like to take part in my study?

24 February 2021 4,833 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Resistivity of PVD TiNx thin films vs. N2 flow?

In the PVD of TiN thin films (~100A), I've found the resistivity of the TiN films dropped from ~100 to 60um*cm with N2 flow increasing up to the metallic mode ending point; then the resistivity...

21 February 2021 1,864 2 View

Having 2 different substrates under the same deposit conditions (TiN coating) why it is possible to obtain different colours in the 2 dif substrates?

Coating is made by same deposit conditions. substrates are HSS Drill bit and Shim SS 300 series. On the drill bit we are getting some golden color, however on the shim we got no color it is like...

08 February 2021 9,383 7 View

Metal oxide corrosion protection, can it be done through the same techniques used in metal corrosion protection?

If a conductive metal oxide sheet like titanium dioxide (TiO2), indium tin oxide, Vanadium oxide etc. is corroding due to contact with solutions that contain oxidizing agents, what is the chemical...

20 December 2020 8,773 5 View

What is the wavelength dependent refractive index equation of AZO & TiN?

I am currently working on Surface Plasmon Resonance based biosensor. I want to utilise AZO (aluminum doped Zinc Oxide) and TiN (Titanium Nitride) as the plasmonic material for my sensor. So I need...

05 November 2020 9,855 8 View

What is the etching process of a commercial ITO coated glass?

I needed to make electrodes on ITO glass by etching. I read different ratios of mixing HCl, H2O and HNO3 would etch. I did not follow which one would work for a commercial ITO. Will it work if I...

26 October 2020 4,073 5 View

How to bond the ruthenium sputtering target with copper baking plate?

We have tried to bond our ruthenium target with copper baking plate using Indium but it didn't work. We are looking for suitable options. The indium is only sticking to the copper plate not with...

31 August 2020 6,750 6 View

How can I improve adhesion of decorative coating in blind points and corners of brass based faucet?

hello everyone I will be so grateful if someone gives me a solution. I worked on adhesion of decorative coating on faucets and I face a problem. our process is electroplating and Ni shows good...

21 June 2020 9,287 6 View

How can we measure muffin tin radius for soild or bound atom?

Need formula or table of muffin-tin radius for all atoms.

28 April 2020 2,787 9 View

No title

Please I need to know the pressure ?, relative proportions of Titanium and Nitrogen Imput in the plasma chamber?, Discharge curent density directed to samples? , sample voltage?, target voltage...

24 March 2020 1,409 3 View