Can you help me to interpret DSC peaks?

More Tb Bo's questions See All

Why silver nitrate white powder turn to brown powder in oven?

I was trying to dry silver nitrate powder in oven at 100C under vacuum. After couple of hours the color of silver nitrate powder turned from white to brown. does this mean, I have metallic silver...

09 October 2018 4,600 3 View

How do I separate reaction product from the solvent?

I set up a synthesize reaction and used DMF as my solvent. After the reaction completed, I transferred solution in to a beaker and added about 90ml water into the beaker (picture attached). Water...

08 September 2016 7,431 7 View

Can you help me to interpret DSC peaks?

After synthesizing an organic polymer, I run it in DSC. There are two endothermic peaks one around 120C and another around 300C. Is this mean, I synthesized organic molecule instead of polymer?...

08 September 2016 1,694 3 View

Does anyone know how to extract NaOH salt from water soluble polymer powder?

I am trying to remove NaOH salt from a thermoset polymer powder that I synthesized. The polymer is water soluble. How can I remover the salt from the powder?

04 May 2016 4,859 4 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

How do I determine the degree of polymerization of PEG 400 based on NMR integration?

Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...

02 March 2021 6,186 3 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

Mudassir Ahmed

You used DSC, can you please tell about the environment? was it air or in nitrogen ?

Tb Bo

I run DSC in Argon from room temperature to 550c 10C/min. I have very sharp endothermic peak around 120c and wide and shorter/wide endothermic peak around 300c. Unfortunately we don't have GPC to estimate the MW.

M. L. N. Madhu Mohan

Can you showt the DSC thermogram