Can someone recommend some reliable articles about kinetic parameters for ethane thermal cracking and ethylene production?

More Sajad Sarikhani's questions See All

Can someone introduce an article about the convergence of the temperature parameter for the SPH part in Abaqus software?

For the article, I need some references for the subject of checking the convergence of the temperature field parameter for the SPH part in Abacus, and I want to study this case with a few meshes...

13 June 2024 2,504 0 View

Can introduce an article to check the convergence and independence of the particle temperature with respect to the mesh in FSW welders?

I need help for my thesis.

24 May 2024 8,865 0 View

I need articles about the difference between the application of kinetic and static friction coefficients in FSW welding, Can introduce the article?

In FSW welding simulation in Abaqus, I need some articles to check the difference between friction application methods (penalty - kinetic friction and static friction).

24 May 2024 5,006 1 View

What are the standard methods of washing laboratory containers such as glass and polyethylene using dilute acid in the soil laboratory?

I need standard laboratory methods for washing glass and polyethylene containers in the soil laboratory With the best wishes Sajad Bayat

13 May 2024 5,244 0 View

Which unsolved problem or question you have in mind about chaos and chaotic systems?

If you are a researcher working with chaos and chaotic systems, which unsolved problem or question you have in mind Here I have collected some open problems and questions related to chaos and...

28 April 2024 8,493 2 View

How can I get the coefficient of static friction - kinetic friction and temperature coefficient for alloy Ag31?

For thermal analysis of FSW magnesium alloy welding by SPH method in Abaqus software, I need static friction coefficients - kinetic friction and Decay coefficient. Can someone help me how to get...

22 April 2024 3,944 1 View

Hello How can I solve my problems in FSW welding temperature analysis?

I do the thermal analysis for friction stir welding in Abaqus software with SPH model. The problem I have is that the temperature of the particles is higher than the melting temperature of the...

20 April 2024 7,575 0 View

How to apply heat transfer coefficient in Abaqus for SPH model?

I am doing the thermal analysis of FSW welding. The heat transfer coefficient is applied on the surface, but our SPH part is meshed, how can I apply this coefficient? After finishing the analysis...

04 April 2024 6,325 2 View

Hello How can I solve my problems in FSW welding temperature analysis?

I do the thermal analysis for friction stir welding in Abaqus software with SPH model. The problem I have is that the temperature of the particles is higher than the melting temperature of the...

05 March 2024 6,462 2 View

Hello Can someone help me how to apply the convection coefficient in FSW welding simulation in Abaqus by SPH method?

Hello Can someone help me how to apply the convection coefficient in FSW welding simulation in Abaqus by SPH method? This coefficient is applied to the surface and we have 90 in SPH, how can I...

03 March 2024 6,319 0 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

Ethylene glycol is newtonian or non newtonian fluid?

Some sources say it is treated as Newtonian as ethylene glycol has a higher viscosity than water, which affects the flow characteristics in simulations. But some also say it is non-Newtonian.

09 August 2024 2,111 2 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View

How can rhizobial strains be evaluated without plant experiments?

Hi everyone, I'm looking for a method to evaluate the nodulation ability and effectiveness of different strains of rhizobia. Is there any method that avoids testing in plants? Are there any...

17 July 2024 7,249 0 View

Rick Manner

Here is an older article that might help

Sajad Sarikhani

Dear Mr. Manner thank you for the paper. I have look inside some papers belong to Sundaram et. al. but it describe cracking network up to C3 but not for heavier compounds like benzene. Other researcher unfortunately have focused on C4 compounds only. There is no reliable paper for C5, bz and hevier compound cracking. Do you know any reference/paper addresses this problem?

Thank you