Rheology, Young's Equation, contact angle
Inorganic chemistry
01 February 2018 5,430 5 View
Rheology, Polyaniline, Organic
31 December 2017 1,857 1 View
Characterization, Nano particles, Nanotechnology
31 December 2017 5,510 2 View
Nanotechnology, Solid state physics
03 April 2017 6,634 16 View
Nanotechnology
31 December 2016 7,121 4 View
Nanotechnology, chemistry, nanomaterial
31 December 2016 6,964 4 View
Semiconductor Physics, Physics, Material Science
06 July 2016 6,762 5 View
Poly vinyl alcohol
06 July 2016 7,353 0 View
The need is to make aqueous solution of PANI with such amount of viscosity that PANI solution can be used for printing some structure in micrometer regime.
06 July 2016 5,439 2 View
chemistry, conducting polymers
06 July 2016 2,387 9 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
Dear Researchers I need to know, how to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field data in Tecplot? Thank You
02 August 2024 3,615 1 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose
25 July 2024 438 3 View
I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...
23 July 2024 4,074 2 View
We are trying to coat some cathode materials on Al-foil ( ex - LiFePO4 , S@CNT, etc). When we coated the Al foil with the cathode (ex - S@CNT) material , the cycling result was annoying. But the...
09 July 2024 5,123 4 View
I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...
08 July 2024 7,327 4 View
We have been experiencing repeated what looks very much like fungal contaminations in several incubators (in the same lab). We have tried the following repeated times and yet the coating on all...
02 July 2024 6,375 2 View
