Can basic inferior fuel related properties of crude biomass pyrolysis oil (BPO) be attributed to the presence of polar compound such as various oxygenates, nitrogen heterocycles and...
08 September 2019 4,591 4 View
What is the significance of additive in Oil Sands Recovery Processes? What is the role of Mechanical Engineer with the adoption of additive for recovery?
07 August 2019 6,373 3 View
How feasible is it to demonstrate solid fuel conversion and biodiesel production modelling in program environments such as matlab, python and fortran?
05 June 2019 4,353 4 View
What are the latest innovations in biodiesel production, hydrogen and fuel cells?
03 April 2019 4,717 3 View
What are the useful material and book for modeling biomass conversion processes using relevant tools (e.g., Aspen Plus)?
02 March 2019 7,687 3 View
As a Ph.D Supervisor, how will guide your project students to investigate CO2 capture and utilization in manufacturing industry via techno-economic tool?
01 February 2019 7,991 1 View
How can I adopt CFD, C+ + and finite element to improve and model Li battery management for effective utilization? I would appreciate discussions on the technique of model tools, experimental...
01 February 2019 5,625 2 View
Dear RG, How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models? Best Regards, Dr. O.D. SAMUEL
11 December 2018 1,672 4 View
Dear RG, Literature has showed that cetane number (CN) of biodiesel e.g jatroha oil methyl can be calculated by CN =Xme (wt.%)XCNme; where CN is the cetane number of the biodiesel; Xme is the...
11 December 2018 8,399 5 View
What is the best way to teach CFD/suitable lecture material to undergraduate students in Department of Mechanical Engineering?
11 December 2018 2,844 14 View
Dear network, I am looking for the LCA or LCI or at least the energy balances of the non woven fabrics process for my master project, in specific for natural fibers, yet I have found...
02 March 2021 9,662 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !
01 March 2021 2,501 3 View
Dear Dr. Cai, my name is Simone Prospero and I work in the team of Phytopathology at the Swiss Federal Institute for Forest Snow and Landscape Research (WSL;...
01 March 2021 1,133 1 View
The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...
28 February 2021 6,560 14 View
I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...
27 February 2021 6,801 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
Hi, I am having trouble with a problem, in the field of Optimal Control and the generation of optimal time-series. Let's consider a system, whose dynamics are represented by dx/dt =...
24 February 2021 9,105 2 View
I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium
24 February 2021 1,915 1 View
