Can nano joining be a key for nano manufacturing and nano device fabrication?

More Anming Hu's questions See All

Does anyone know an alternative material for Au electrodes in printable electronics?

Golden electrodes are superior for super capacitors and battery application. However, Au is not economic for disposable. Printable electronics should be built on cheaper materials.

31 December 2014 3,552 5 View

Does any one know the latest review of EC on the application of nano materials?

Electrochemical methods have widely applied for industrial manufacturing, energy devices, bio and environmental analysis.

06 July 2014 6,440 1 View

How to effectively remove the engineering nano particles from industrial wastewater?

Engineering nanoparticels are nanoscale alumina, ceria and silica, which are extensively used for mechanical polishing in semiconducting industry. To get rid of these becomes an emergent issue.

05 June 2014 756 1 View

Besides cvd, can anyone recommend an easy method to fabricate Ge nanowires?

I am trying the hydrothermal method.

03 April 2014 8,946 2 View

Does anyone know the plasmonic resonant frequencies for the following metals: Fe, Al, Mg, Ti?

This parameter is critical to determine light coupling efficiencies.

03 April 2014 9,703 3 View

What are the advantages and disadvantages of a Li ion rechargeable battery?

Currently some people focus the scale-up of Li batteries, while others shift to other style batteries, such as Na-air batteries. What is your view?

03 April 2014 9,955 6 View

For a nanomanufacturing course I will teach this fall, what do you suggest for the contents I should cover?

Nanomafacturing is a subdomain of advanced manufacturing. It is an emergent topic for mechanical engineering. This is a combined course for both under and grads.

03 April 2014 9,267 7 View

How can we manipulate a nanowire?

People have tried AFM tip, optical tweezer, microfluidics and so on.

03 April 2014 3,454 6 View

How can we synthesize silver triangle nanodiscs with sharpe angles?

We are using hydrothermal methods to make silver triangle NPs. However, these nanodiscs are truncated, i.e. they have a round angle.

03 April 2014 328 5 View

Can anyone help point out some literature about superplasticity, especially at a nanoscale?

I am studying superplasticity at a nanoscale.

03 April 2014 8,096 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

How to compare two groups with only two measurements?

Hiiiii everyone! I have an enquiry on statistical analysis. I was looking for many forum and it's still cannot solve my problem. I want to compare means of two groups of data but only with two...

03 March 2021 8,796 3 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Guidelines for survey (question type) analysis?

Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...

03 March 2021 2,037 3 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

How to access MSCI KLD Stats and Sustainalytics?

Hello all, I'm currently working on my undergraduate thesis and I'm having difficulties trying to access KLD Stats and Sustainalytics because my campus Airlangga University and apparently other...

02 March 2021 8,525 1 View

Ideas for Phd's Thesis on pricing (Marketing)?

Hi everyone, I'm studying Marketing and I would like to write my PhD thesis on the topic of pricing. Any specific ideas?

02 March 2021 9,706 5 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Anming Hu

As you mentioned a hybrid method could be a solution. Array growth, self-assembly and interference processing could partially tackle with this issue. I am studying the materials through your linkage.

This is an active platform which allows we discuss. Better than other internet channels.

S Ravi P Silva

As noted in your previous question, nano-joining is possible in an SEM using currents.

See the following paper:

https://www.researchgate.net/publication/30929448_Study_of_the_Current_Stressing_in_Nanomanipulated_Three-Dimensional_Carbon_Nanotube_Structures?ev=prf_pub

Article Study of the Current Stressing in Nanomanipulated Three-Dime...

Hi Silva,

This is a very interesting work. We did the similar study in air or in liquid. You can find our relevant studies in my publication list.

Thanks for message!

Excellent. Thank you. Will look it up!

We will organize an international conference focusing on micro and nano joining. please check the following linkage: