Can I use a pin-on-disk (cylinder PDC ) configuration on CSM ?

More Amine Rezzoug's questions See All

I need help on PHITS ?

I have a problem defining my mat[2], can you help me? THANKS [ M a t e r i a l ] mat[1] Ce 2 O 12 W 3 mat[2] Si 1 O 2 [ Mat Name Color ] mat name color 1...

02 July 2024 4,534 0 View

Is the AlNiSb a half heusler ?

The half heusler alloys are defined as XYZ with X and Y are transition metals or rare earth and Z is sp element My question : can we consider the AlNiSb a half heusler?

14 March 2024 3,686 0 View

. Mécanisme Fondamental des Incendies ?

La Combustion en tant que Processus 2.2. Éléments du Triangle du Feu 2.2.1. Les Trois Points du Triangle du Feu 2.2.1.1 Le Combustible 2.2.1.2. Le Carburant 2.2.1.3. Le Flux de Chaleur 2.3....

15 February 2024 8,689 2 View

What is the difference between bath water, incubator and drying or heating ovens?

I want to know the behaviour of my sample at a temperature of "37 degrees in the three types of equipment cited above, and will I have the same results.

28 December 2023 545 1 View

Is this Globigerina venezuelana?

From a Middle Miocene sample

12 December 2023 9,912 0 View

Sharing Non-Open Access Manuscripts?

Greetings, all! When you are applying for an assistant professor position and you need to include non-open access articles in your application. Is it possible to share the entire manuscript or...

12 December 2023 9,187 3 View

Can you identify this foraminifera?

Hello This is a foraminifera from a Middle Miocene sample, size is about 400μm. Can you identify this species?

12 December 2023 8,399 2 View

Speech sounds disorder ?

cohort study

07 December 2023 4,284 2 View

How to obtain a concentration of 1 mM/dl of ammonia from ammonium chloride?

How many mg or g of ammonium chloride (NH4Cl) to obtain a final concentration of 1 mM/dl of ammonia (NH3) ?

03 December 2023 2,627 1 View

How to maintain Part Positions in an Assembly after a 'Motion Study' in SolidWorks?

Hello, I am currently working on a packed column model in SolidWorks. The column comprises a packing material consisting of numerous beads (or other packing types such as Raschig rings) initially...

01 November 2023 5,275 4 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View

What could be the possible reason that sintering of polycrystalline diamond fabricated with tape casting has suddenly started failing?

I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...

16 July 2024 3,212 5 View

Can someone help me to model a core-shell nanostructure in GDIS and subsequently prepare the fdf file for using in SIESTA?

I am very new to the material modelling in GDIS. So, I want to learn how to model a nanostructure specifically core-shell in GDIS.

28 June 2024 5,224 0 View

What may cause whitish discolor of polycrystalline diamond surface, and cracks near edge?

I am preparing polycrystalline diamond (PCD) with tape casting. The powder is 8~12 um. After drying of tapes, I place several tapes in Ta cup without warm-pressing. Next, debinding is carried...

23 June 2024 7,758 2 View

What is the difference between creep deformation and stress relaxation ?

I understand the basic definition for both. I found a literature to describe both of them. In the paper, they states: If a stress is applied to a concrete body, the body experiences an elastic...

19 June 2024 525 3 View

Difference between creep deformation and stress relaxation deformation ?

I understand the basic definitions of creep and pressure relaxation. However, I am confused about the exact difference between them. See attached photo. Because a compression force is applied,...

17 June 2024 5,344 2 View

What is the relation between "Depth of Field" and "Resolution" in microscopy ?

Please explain with reference to the attached figure. Also, What does "infinite resolution" of a microscope (optical or electron) imply? Similarly what do we mean by "zero resolution"? Does having...

04 June 2024 711 4 View

What is the difference between absorption and adsorption?

30 May 2024 4,447 27 View

Amine Rezzoug

Thank you dear Adolfo for your attention to my question and for your advice, I am taking note.

Best regards

Amine

Roy Morgenstern

From the technical aspect, it should be possible to replace a ball by a pin in most tribometers by adjusting the clamp of the counter-body. However, keep in mind, that geometrical characteristics like parallelism might differ strongly between different pins. This might impair the reproduceability.

Thank you, dear Roy Morgenstern, for your attention to my question.

Yours sincerely,