I have been in discussion with my colleague about the fabrication of PSCs with CH3NH3PbI3-xClx absorber material and there is a claim that chlorine dopant sublimes during annealing. If anyone has encountered the same problem kindly share.
you can read this paper
Article MAPbI3-xClx Mixed Halide Perovskite for Hybrid Solar Cells: ...
Dear Dehbi,
Thank you so much
Dear Isoe
You are welcome
This article is surely already known?
Article Elucidating the Role of Chlorine in Perovskite Solar Cells
Best regrads
Dear friends, I am doing a PhD and one of my objectives is to use DSSAT for modeling effect of Climate change scenarios on maize productivity in SW Uganda. My study area lies btn 0.8435° S,...
19 March 2022 4,185 3 View
I shall really appreciate your support. Thank you.
31 May 2021 9,133 1 View
In my RCBD field experiment, I would like to measure the following parameters for two maize varieties (local and improved) and two varieties of beans (NABE16 and velvet beans): 1. LAI 2. Grain...
09 July 2020 4,185 4 View
I am doing an assessment about climate smart agriculture in South Western Ugandan farmers. I am wondering what would be the key indicators that I should look for in this case. The purpose for this...
01 January 1970 265 10 View
Iam requesting someone to give me a link(s) where I can download the climate datasets (preferably in CSV format) for RCP2.6, 4.5,6.0 and 8.5 from 1980-2099 (daily rainfall, Tmax, Tmin, SAR, RH,...
01 January 1970 1,160 0 View
What is the best model to be used in soil water and nutrient conservation for my research? Have a look at the attached concept and advise me on the last objective. Thanks
01 January 1970 5,316 3 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...
22 July 2024 9,761 5 View
I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...
16 July 2024 5,031 1 View
What is the behavior of anaerobic bacteria in deep salty groundwater with high level of chlorine? Is the nitrate level deceasing and is denitrification controlled by excess chlorine? Thanks
13 July 2024 1,581 4 View
I seek to understand the theoretical basis for selecting the optimal temperature for the thermal regeneration process of exhausted adsorbents, such as activated carbon loaded with dye molecules....
28 June 2024 1,867 3 View
Suppose we have dried MXene slurry (Ti3C2Tx), then the combination of which solvent (in which this dried MXene slurry powder will be mixed, subsequently forming the "ink") and corresponding...
13 June 2024 5,763 0 View
I have prepared Copper thin films by magnetron sputtering and the samples have been annealed at 100, 200 and 300 degree celsius. The variation of the rms roughness and all other AFM height related...
11 June 2024 9,774 1 View
in this link refractiveindex.info i didnt find i work on a simulation comsol of mesoporous perovskite i want to know the properties optoelectric and n,k coff
09 June 2024 2,071 4 View
for the Perovskite material
03 June 2024 1,027 1 View
Hi, I'd like to know if someone knows about a company where I can buy an affordable laser-scriber for perovskite films and another thin film for the fabrication of modules. Many thanks,
31 May 2024 2,841 0 View