Why can't I run sample more than 40 mins in Agilent HPLC even after loading method for 45 mins?

Hi, I am using an Agilent 1200 series and Chemstation software. When I try to set run-time more than 40 mins (for ex. 45 mins or more than that), run-time is getting over within 40 mins even after...

26 January 2021 7,136 3 View

How to interpret multiple bell shaped curves in Kratky plot?

Hi, I'm trying to analyze a Kratky plot generated from my SAXS data. I am seeing multiple bell-shaped curves in my Kratky plot and I am not able to find any source to get relevant info on this...

20 January 2021 2,474 1 View

Lift off problem with Indium/Gold deposition?

Hi, I'm doing 5/40nm In/Au e-beam evaporation at rates 0.2A/s(for In),1A/s(Au) on lithographically(doubly coated 495k,950k PMMA e-beam resist) done Si substrate at base pressure 2e-6torr. I'm...

18 January 2021 7,550 4 View

How to Import .inp file from abaqus CAE to Ansys perfectly?

I am trying to import an Abaqus .inp file to Ansys but it does not import the whole assembly but only imports a single part. How to solve this.

17 January 2021 5,450 3 View

Can I know the reason for these non specific bands?

a PCR and gel electrophoresis was carried out to obtain the results. they are negative jak2 v617f samples (ref genome - NG_009904 )

13 January 2021 7,658 4 View

Which third party CFD Codes can be used for FSI Co-Simulation in Abaqus ?

Since Abaqus CFD is no longer available in newer versions what are other available codes for Fluid-Structure Interaction Simulation

11 January 2021 2,012 3 View

How to determine Viscoelastic and Hyper Elastic Material Properties for Abaqus by mechanical testing ?

I am studying about Impact load resistance property of Polyurea (Elastomer). With respect to this, I need to conduct tests on this material to evaluate its material model behavior as a...

29 December 2020 2,969 1 View

How to remove rotation along z-axis and shift the origin to body's center?

I have attached the files with this post to explain me how to remove rotation and center the origin at the body's local coordinate. This is just one sample and I have 1000s of files like this. I...

18 December 2020 3,838 3 View

Reason for growth of fungus/mould in hydrothermal liquifaction filtered product of cellulose-based materials?

Performed hydrothermal liquefaction of cellulose powder, at about 200 degrees for 10 16 hours. After simple filtration, I stored filtered product at room temperature for 4-6 days, there is the...

03 December 2020 7,327 3 View

Is Coefficient of Variability (CV) positively correlated with root mean squared error (RMSE) in every case??

My data for fungicide treated replication shows higher RMSE and R-square but less CV compared to the untreated replication for a regression between vegetation indices and yield. How correct is it?...

23 November 2020 2,079 6 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How can we theoretically calculate Elemental analysis(percentage) of atoms in covalent organic framework?

For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...

24 February 2021 1,265 6 View

How to Control Whiteflies in coconut leaves?

24 February 2021 1,005 1 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

How to get/count refractive index in gasses?

20 February 2021 8,202 6 View

Any Homemade Organic Synthesis Practices?

Hi everyone, I am a teacher of Heterocycles Synthesis, Is there a home practice that you recommend for undergraduate students? A simulator would also be useful Due to the pandemic, students...

18 February 2021 2,769 4 View

How to find the capacitive response frequency from the impedance plot?

I have done electrochemical impedance by using cyclic voltammetry for one organic material. from that, I plotted bode diagram. but actually, I am very confused about how to find the capacitive...

18 February 2021 3,023 3 View