Can anyone suggest to me a suitable etchant for cds electrodeposited on ITO?

More Rekha Bai's questions See All

Does the first semicircle represent contact resistance, and what is the reason for its generation?

My research topic is the corrosion of gray cast iron in methanol. EIS measurements were conducted at open circuit potentials (Eoc) using a sinusoidal signal with the amplitude of 10 mV from 100...

05 June 2024 6,891 2 View

About MIL-125 XRD pattern ?

I tried to synthesise different morphologies by adjusting the ratio of DMF to methanol. When the DMF and ethanol ratios were 9:1 and 7:3, the XRD images of the samples showed a diffraction peak...

08 April 2024 4,336 4 View

Why the Mg element is rarely found in high-entropy alloy designs?

A very interesting phenomenon, for the existing high-entropy alloy design, the use of more elements are Fe, Ni, Co, Cr, Mn, Al, V, Ti, Zr, etc. However, the Mg element is rarely found in HEAs....

09 January 2024 2,599 4 View

Inquiry Regarding SWAT Model Operation for Pesticide Concentration Simulation?

I am a researcher at the Sun Yat-sen University, China. I am currently working on a research project that involves the simulation of pesticide concentrations in surface water using the SWAT model....

08 January 2024 1,237 0 View

In ICP-OES, how the characteristics of particle, or its interaction with the plasma, will influence the signal?

I am wondering the possible influencing mechanisms of plasma on particles. Thanks for your attention : )

30 August 2023 5,799 0 View

How can I use an ANN to predict land use?

How can I train an ANN using current raster data (population, precipitation, DEM, land use) and use this model to predict future land use based on upcoming raster data (population, precipitation,...

23 August 2023 6,487 1 View

How to identify alpha and beta cellulose on the basis of extraction method?

In my study we used chemical treatment for the extraction of cellulose.

17 August 2023 4,264 1 View

Free softwares for adsorption study its kinetics isotherm and thermodynamic and also which software is used for error data analysis?

In my study i am using nanocellulose based membrane for the adsorption study of dye and heavy metals

26 July 2023 2,307 4 View

Recent ongoing research on voice cloning ?

till Now, what all research have been done in voice cloning with security prescriptive, what new can be done ?

22 July 2023 4,846 0 View

How we can fix this error File "qe2boltz.py", line 253, in <module sys.exit(main()) File "qe2boltz.py", line 130, in main for ir in range(n?

File "qe2boltz.py", line 253, in sys.exit(main()) File "qe2boltz.py", line 130, in main for ir in range(nsym): UnboundLocalError: local variable 'nsym' referenced before...

17 July 2023 509 0 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Why does my protein refolded to beta sheet during thermal denaturation analysis?

Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...

06 August 2024 1,989 3 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Why is TLC not a form of partition chromatography?

Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?

03 August 2024 7,035 3 View

Is there a good freeware software for photodocumentation of TLC?

I need something like Camag's VisionCat software for photodocumentation of TLCs. Could you recommend something?

31 July 2024 8,415 1 View

¿Are oxygen vacancies in semiconductors capable to change the band gap?

Dear all! Oxygen vacancies do raise negatively the Fermi level by increasing the negative charge in the semiconductor crystal structure. In the case of n-type semiconductors, I wonder if this...

30 July 2024 8,339 2 View