Can anyone provide the Support vector regression code structure of LIBSVM MATLAB or python ?

Please, if Gaussian Parameter optimization is possible in this code structure

28 February 2021 278 3 View

Is there any solar electric power plant having the concentrated photovoltaic modules?

The solar photovoltaic (PV) power plant uses commercial (non-concentrated) PV modules which are quite simple in design and reliable. They can work on fixed orientation and don't need the moving...

16 February 2021 3,796 9 View

Use of Sine voltage source in Electrical circuit with frequency domain study in COMSOL?

Dear Sir/Madam I want to use Sine voltage as a source in an RLC circuit. I want to study the driving point impedance with frequency sweep. But when I use sine voltage, I get an error like The DAE...

13 January 2021 9,826 5 View

Low value of Cd for Flow Past a Square Cylinder Simulation?

Hi everyone, Happy New Year! I am carrying out a Simulation for Flow Past a Square Cylinder. I am using Ansys Fluent. I get a very low value of Cd in the simulation. The solution converges but...

03 January 2021 4,389 3 View

How do I turn off the wall function for k-w SST simulation in Ansys Fluent?

I am using a very fine mesh (D/1000). Since I cannot find an option to turn off the wall function in Fluent GUI, could you please let me know how I can turn it off? From some forum I got to know...

21 December 2020 9,186 15 View

How to find Inverse Laplace of a large matrix in MATLAB?

I am trying to find out the inverse Laplace transform of the state transition matrix obtained using inv(S*I-A). Where I is the identity matrix, and A is a state-space matrix(24x24 matrix). I have...

21 December 2020 7,041 3 View

Why do I get Floating Point Error! on simulating with very fine mesh using k-w SST model in Ansys Fluent?

Hi everyone, any insight is appreciated. I am simulating with a D/1000 [first boundary layer height] mesh the flow past a square cylinder (inside a Circular domain). For Coarser mesh, I had no...

21 December 2020 5,438 10 View

I have rat dose of my formulation , how can I calculate mouse dose of same formulation using rat using rat dose?

Dose conversion from rat to mouse?

23 November 2020 1,807 3 View

What are the names of glasses used in the solar panels?

For my research purpose, I need the name and optical properties of the glass used on the front surface of the solar panel. Can someone provide me the aforementioned data with valid references? Is...

22 October 2020 9,714 9 View

In Abaqus, how to give stress field data from an output of a model to a new model as an input field having the same part?

I have 2 models where the first model is a subpart of the second one. The components of the subpart have the same mesh and geometry in both the models. I have performed stress analysis on the...

18 October 2020 9,256 5 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

No title

02 March 2021 3,060 3 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

New Journal, "Integrative Psychological and Behavioral Science" -- do you not know, and have you not seen, this done before?

Question to you and THEM, the New Journal, "Integrative Psychological and Behavioral Science" -- do you not know, and have you not seen, this done before? There appears to be a core problem for...

02 March 2021 3,024 2 View