Dear all,
I would like to conduct scratch and linear reciprocating tribo-test on my magensium alloy, which has a plasma electrolytic oxide (PEO) layer of about 20 um and 10 - 20 um of Parylene coating on top of it. So it is a double layer system.
I made a research on ASTM standard tests for scratch and linear reciprocating tribo-test and I found ASTM C1624 - 05 for the first and ASTM G133 - 05 for the second. However, I am not sure if these standards are applicable to a double layer coatings as in my system.
Are there some specific standard tribological tests for multilayer coatings?
Thanks!
ASTM C1624 test standard is the most used standard for this. You can read the article below, this may help you and clear your doubts
An ASTM Standard for Quantitative Scratch Adhesion Testing of Thin, Hard Ceramic Coatings
Stephen T. Gonczy Nicholas RandallFirst published: 05 October 2005 https://doi.org/10.1111/j.1744-7402.2005.02043.x
ASTM C1624 test standard is the most used standard for this. You can read the article below, this may help you and clear your doubts
An ASTM Standard for Quantitative Scratch Adhesion Testing of Thin, Hard Ceramic Coatings
Stephen T. Gonczy Nicholas RandallFirst published: 05 October 2005 https://doi.org/10.1111/j.1744-7402.2005.02043.x
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering
- Coating