Are there methods to characterize the electrical properties of charge transport layers used in QDLED?

11 November 2013 0 7K Report

I'm in the process of fabricating colloidal quantum dot LED using layer by layer deposition. I wish to characterize the hole transport layer and electron transport layer before fabricating the device.

Badges
Science topic

More Ramesh Vasan's questions See All

Can all-inorganic QLED emit efficiently in the space charge limited current region?

I have fabricated an all-inorganic QLED with FTO/NiO/CdSeZns/ZnO/Al. It has three conduction regions corresponding to Ohmic, Trap limited and space charge limited (SCLC). I expect the device to...

09 October 2017 5,492 4 View

How to convert counts/sec to photon flux or A/W?

I have used a Si CCD detector setup to measure the electroluminescence of a LED. The y axis unit is given as counts/sec. I want to extract the output power density of the LED. Is there a way to...

08 September 2017 557 4 View

Can any divalent or tetravalent metal cation replace the lead in perovskite material?

What are the possible metal cations that can replace the existing lead in lead halide based perovskite material. There are reports of tin and antimony being studied as replacements. Can any other...

07 August 2016 5,453 5 View

How to measure the work function of a semiconductor?

I want to measure the type and work function of Beta Gallium oxide. Unfortunately I dot not have access to UPS or Kelvin probe set up. Is there an indirect method to measure the work function of...

07 August 2016 5,100 3 View

What could be the reason for a red shift in the PL of CdSe/ZnS core shell nanocrystals mixed with nickel oxide nanoparticles?

I have CdSe/ZnS red emitting nanocrystals in chloroform. The PL peak of these nanocrystals is at 635 nm. When I mix the nanocrystal dispersion with nickel oxide nanoparticle powder and measure...

01 February 2016 6,078 3 View

Is there a technique to meaure the PL decay time indirectly without the use of time resolved PL measurement?

I want to measure the PL decay time of CdSe/ZnS QDs spin coated on glass and nickel oxide thin film separately. Unfortunately, I do not have access to a time resolved PL system. I'm looking for...

01 February 2016 5,466 3 View

How does one obtain CdSe/ZnS quantum dots in powder form?

I have CdSe/ZnS quantum dots with oleic acid ligand in hexane solvent. As synthesized quantum dots were purified with excess of methanol and acetone in a centrifuge. I wish to isolate the quantum...

08 September 2014 9,810 10 View

How can I deposit aluminum using an electron beam evaporator?

I'm trying to deposit aluminum from a boron nitride crucible using an Ebeam evaporator at a pressure of ~5e-6 torr. When the metal melts, it starts boiling and bursts out globules of molten metal...

07 August 2014 3,287 9 View

What kind of gases can be used in a RIE to etch Indium doped tin oxide (ITO)?

I wish to pattern ITO coated glass substrate for QDLED application using a RIE.

06 July 2014 3,042 3 View

How do you measure the electron affinity of CdSe/ZnS nanocrystals?

I'm interested in measuring the band alignment of colloidal grown CdSe/ZnS nanocrystals. Is there a direct or indirect method to measure that?

06 July 2014 2,259 2 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,800 2 View

Which Scopus Journal provides the most affordable fees?

"PUBLISHING IN A SCOPUS JOURNAL" Researchers are now at a cross road. The critical need to publish in a Scopus or ISI, etc journal is ever vital. Journal Publication fees must be submitted....

10 August 2024 8,617 1 View

Controlling for pupil light reflex when analyzing pupil size time course?

I used eye tracking to examine how participants from two different populations (A and B) react to an image. Participants in population A exhibit larger pupil sizes over time, but they also have...

10 August 2024 3,228 0 View

Seeking Advice on Viability and Execution of Undergraduate Thesis Topic?

Hello everyone, I am currently developing a thesis proposal and would appreciate your input on its viability and how to effectively carry it out. My proposed topic is: "Does the perceived threat...

10 August 2024 8,991 0 View

Who will be moral responsible for the death of thousands of people in the event of an earthquake?

Who will bear moral responsibility for the deaths of thousands of people in the event of an earthquake? Weeks and months remain before the onset of strong earthquakes that bring death to...

08 August 2024 6,133 12 View

Are air moisture harvesting technologies effective in combating desertification?

Air moisture harvesting Air water collection devices

06 August 2024 5,472 2 View

Are there any instruments for studying time similar to the way it is in space?

There are a huge number of methods for studying objects in space, according to the senses (and not only). Mechanical, thermal, optical, acoustic, electrical, magnetic, based on particle beams,...

06 August 2024 7,102 0 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,809 3 View

In the case of a wound l recurrence after radical breast cancer and sentinel lymph node biopsy. Are the sentinel lymph node procedure recommended?

In the case of a wound l recurrence after radical breast cancer and sentinel lymph node biopsy. Are the sentinel lymph node procedure recommended? If no axillary lymph node dissection was not...

05 August 2024 8,054 1 View

How to use Density Functional Theory to calculate carrier mobilities of solid system?

Hello, everyone. I have tried to determine carrier motilities of some materials, by Density Functional Theory, using Quantum ESPRESSO. There are a few methods to do it, like a package called...

04 August 2024 8,891 1 View