Anyone interested in collaboration on Orthopedic Implant Coating Development project?

Ayda Khosravanihaghighi @Ayda_Khosravanihaghighi2

11 November 2018 1 1K Report

I am looking forward to find a collaboration in above mentioned field specifically someone who worked with MG-63 Cell lines before.

If someone interested and have previous experience on that, I would be happy to discuss further.

Mahmoud Zakaria Ibrahim

I have done some work on development of orthopedic implant material and I have performed a cell culture test using MG-63.

Here is my email if you need further discussion

[email protected]

or [email protected]

Badges
Science topic

More Ayda Khosravanihaghighi's questions See All

How to calculate CFU/cm2 or CFU /cm3?

I have a square 1cm*1cm*0.05cm (0.05 cm is the thickness) sample and after immerse them in the 6 well-plates containing 4 ml s.aureus Bacteria suspension for 24 hrs, and doing the serial dilution...

04 May 2019 1,098 13 View

Methodology protocol for MG-63 Cell line?

I am going to get trained on the cell culture but since I have not biological background it is kind of tough to start. 1- I was wondering whether anyone has worked with this specific cell-line to...

09 October 2018 3,773 0 View

The volume of Simulated Body Fluid (SBF)?

I have prepared SBF according to Kokubo recipe. My sampled are 1*1 cm2 Ti-alloy sheets with the thickness of approximately 1 mm and a thin layer of coating (Ra of the samples without coating 15...

09 October 2018 8,990 7 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

Interested in a SCOPUS collaboration?

Hi RG family. My team and I are working on some SCOPUS publications and we need co-authors who are willing and capable of undertaking both qualitative and quantitative-based studies. The scope...

02 August 2024 7,843 0 View

Is there any Indian Company or Startups, from any universiy or IITS, which manufacture Gas Chromatography instrument , i want to make a custOmized G?

or we can collaborate

01 August 2024 6,705 2 View

Have you heard about Technological Surveillance on Oceanographic Research Vessels?

It is important to highlight that technological surveillance on oceanographic vessels is a collaborative effort in which different specialists work together to effectively leverage technology in...

31 July 2024 1,633 0 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Are you interested in contributing a book chapter on biomaterials in Orthopaedics?

I am editing a book for Springer Nature on recent advancements and future trends in biomaterials for orthopedic and trauma applications, with a publication date slated for early next year. If you...

29 July 2024 5,015 9 View

Could you try using PeptiCloud and see if it's a useful tool for biology research?

PeptiCloud (www.pepticloud.com) is a bioinformatic platform that allows researchers to organize and share their data for their projects as well as collaborate with others in one place. Through...

28 July 2024 4,762 2 View

How can I find writers for drafting, submitting, and publishing papers?

Looking for paper collaboration writers： Collaboration Model 1: 1.1 Based on the chosen topic, complete the paper writing, select an SCI or SSCI Q1 journal, submit using my QRCID, and complete...

27 July 2024 8,965 1 View