Is there any thin, flexible conducting wires capable of current carrying of around 0.5-1.0 Ampere?

I want to use connecting wires for the soft robot to deliver electric current of around 1 A (voltage 5V), however currently available wires are quite rigid and they exert negative force for the...

05 January 2021 4,485 3 View

A three electrode sensor inkjet printed gets damaged in few hours of usage in a dynamic media flow chip, any solution for that?

We are using some biosensors which are inkjet printed and are used in the microfluidic chip where media is flowing at the flow rate of around 60 uL/min. However, after the continuous use of few...

05 January 2021 610 2 View

USB based DAQ options with atleast 4 analog output channels and 8 analog input channels other than National Instruments?

National Instruments provides vast variety of DAQ options which are based on LabVIEW, however they are way too expensive when it comes to opting option with high analog output channels (like 4)....

30 August 2020 5,195 6 View

What could be direct/indirect roles of insects (entomology) in current pandemic COVID-19?

Because there is no any vaccine for COVID-19 until and in past insects have transmitted number of diseases like; chikungunya virus, yellow fever, dengue fever,Lyme disease, plague,malaria,...

24 June 2020 9,557 30 View

Automatic Save STARCCM+: Warning ''Insufficient space on the disk''?

Hi Everyone, While running the simulation, I kept the file on ''Autosave'' so that each time step is saved (to avoid loss of data due to internet disruption since I am using VPN) but after 1-2...

13 May 2020 7,645 3 View

Where to purchase flexible connecting wires for soft actuators?

Normal wires (for providing voltage) to soft actuators behave as an obstacle to the actuators and hence the real response of designed soft actuators is not known. can you please share the online...

13 November 2019 5,602 1 View

How to classify a text in to different categories without predetermined labeling?

I want to classify a text of more than 1000 words into a categories. I have a database of 10,000 reports of which each contain more than 1000 words. I want to classify them and would like to know...

04 October 2019 1,554 5 View

Any temperature sensor (other than probe type) reported in Microfluidic system or organ on chip?

Normally, I have seen the commercial temperature sensors of probe type are used for microfluidic or organ on chip platforms. I am looking for any paper in which temperature sensor is reported to...

30 May 2019 7,293 4 View

Why are stator currents flowing during stand by mode on flywheel energy storage system?

Hello everyone, I am working on Induction machine driven flywheel storage system. I am facing problem with stator currents. There are stator currents of the magnitude 10-20A during standby mode of...

11 February 2019 6,868 5 View

Is there any way to cure the collagen for making thin membranes?

collagen is commercially available in liquid as well as in fibrils, is there any way through which we can cure and make a thin layer like membrane using collagen?

16 September 2018 1,444 3 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

Do you know any MR image dataset?

I would like to research on MR images (0.5T and 3T). Can you please suggest some websites that I can download dataset including both 0.5T and 3T MR images? Thank you.

02 March 2021 7,735 3 View

Which is suitable for use with Python? MySQL or SQL Server?

Which is suitable for use with Python? MySQL or SQL Server? What is your suggestion?

01 March 2021 3,422 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View