Afaque Manzoor Soomro

11 Questions 13 Answers 0 Followers

Questions related from Afaque Manzoor Soomro

Is there any thin, flexible conducting wires capable of current carrying of around 0.5-1.0 Ampere?

I want to use connecting wires for the soft robot to deliver electric current of around 1 A (voltage 5V), however currently available wires are quite rigid and they exert negative force for the...

06 January 2021 4,630 3 View

A three electrode sensor inkjet printed gets damaged in few hours of usage in a dynamic media flow chip, any solution for that?

We are using some biosensors which are inkjet printed and are used in the microfluidic chip where media is flowing at the flow rate of around 60 uL/min. However, after the continuous use of few...

06 January 2021 751 2 View

Any suggestions for pneumatic based media supply systems for microfluidic applications?

Normally, people are using Peristaltic pumps to provide media to Microfluidic chips (Organ on a chip platform). I am looking for pneumatic based media supply systems. anyone having relevant...

21 September 2020 1,520 3 View

USB based DAQ options with atleast 4 analog output channels and 8 analog input channels other than National Instruments?

National Instruments provides vast variety of DAQ options which are based on LabVIEW, however they are way too expensive when it comes to opting option with high analog output channels (like 4)....

31 August 2020 5,326 6 View

Where to purchase flexible connecting wires for soft actuators?

Normal wires (for providing voltage) to soft actuators behave as an obstacle to the actuators and hence the real response of designed soft actuators is not known. can you please share the online...

14 November 2019 5,718 1 View

Any temperature sensor (other than probe type) reported in Microfluidic system or organ on chip?

Normally, I have seen the commercial temperature sensors of probe type are used for microfluidic or organ on chip platforms. I am looking for any paper in which temperature sensor is reported to...

31 May 2019 7,429 4 View

How to encapsulate the meander pattern printed temperature sensor's surface so it can be used in a liquid for temperature measurement?

There are many temperature sensors reported based on printed electrodes (meander or any other pattern) using silver/gold ink. however they are used to measure environmental temperature. if we want...

21 January 2019 7,784 0 View

How to match the refractive index of glass substrate and Prism in SPR using Refractive index matching liquid?

mostly papers report to use refractometer for matching the refractive index, can anyone share the model which you are already using ?

18 September 2018 3,443 3 View

Is there any way to cure the collagen for making thin membranes?

collagen is commercially available in liquid as well as in fibrils, is there any way through which we can cure and make a thin layer like membrane using collagen?

17 September 2018 1,566 3 View

Sensor to measure dissolved Nitrogen gas in media/blood?

I have seen few sensors reported for measurement of dissolved nitrogen gas in soil, however is there any sensor reported to measure the dissolved nitrogen gas in blood/media may be in lab on chip...

03 August 2018 4,366 1 View

Is there any software available in which one can simulate soft robotic motion introducing various material properties?

Is there any software which can be used to simulate the motion of soft robot by using various soft active materials and/or defining their properties?

24 May 2018 7,802 6 View